Measurement of dynamic resistance in resistance spot welding

被引：1
作者：
武佩 [1 ]
吕佳珩 [1 ]
Niels Bay [2 ]
机构：
[1] School of Mechanical and Electrical Engineering,Inner Mongolia Agricultural University
[2] Department of Manufacturing Engineering and Management,Technical University of Denmark,Lyngby,Dk-2800,Denmark
来源：
China Welding | 2007年 / 04期
关键词：
resistance spot welding; dynamic resistance; contact resistance; circuit analysis;
D O I：
暂无
中图分类号：
TP18 [人工智能理论];
学科分类号：
081104 ; 0812 ; 0835 ; 1405 ;
摘要：
The conventional methods of determining the dynamic resistance were mostly done by measuring the voltage and current at secondary side of transformer in resistance welding machines,in which the measuring set-up normally interferes with the movement of electrode,and the measuring precision is influenced by inductive noise caused by the high welding current.In this study,the dynamic resistance is determined by measuring the voltage at primary side and current at secondary side.This increases the accuracy of measurement because of higher signal-noise ratio,and allows to apply to in-process system without any wires connected to electrodes.
引用
收藏
页码：42 / 46
页数：5
相关论文
共 50 条
  • [41] Effects of Au plating on dynamic resistance during small-scale resistance spot welding of thin Ni sheets
    Tan, W
    Lawson, S
    Zhou, Y
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2005, 36A (07): : 1901 - 1910
  • [42] Analysis of the Behavior of Dynamic Resistance, Electrical Energy and Force between the Electrodes in Resistance Spot Welding Using Additive Manufacturing
    Batista, Marcio
    Furlanetto, Valdir
    Brandi, Sergio Duarte
    METALS, 2020, 10 (05)
  • [43] Effects of Au plating on dynamic resistance during small-scale resistance spot welding of thin Ni sheets
    W. Tan
    S. Lawson
    Y. Zhou
    Metallurgical and Materials Transactions A, 2005, 36 : 1901 - 1910
  • [44] Dynamic simulation of resistance spot welding of zinc-coated steels
    王璐
    王敏
    卢凤桂
    China Welding, 2006, (04) : 39 - 42
  • [45] Forging force in resistance spot welding
    Tang, H
    Hou, W
    Hu, SJ
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2002, 216 (07) : 957 - 968
  • [46] Resistance Spot Welding of dissimilar Steels
    Kolarik, Ladislav
    Sahul, Miroslav
    Kolarikova, Marie
    Sahul, Martin
    Turna, Milan
    Felix, Michal
    ACTA POLYTECHNICA, 2012, 52 (03) : 43 - 47
  • [47] Overview of resistance spot welding control
    Podrzaj, P.
    Polajnar, I.
    Diaci, J.
    Kariz, Z.
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2008, 13 (03) : 215 - 224
  • [48] Expulsion prediction in resistance spot welding
    Senkara, J
    Zhang, H
    Hu, SJ
    WELDING JOURNAL, 2004, 83 (04) : 123S - 132S
  • [49] Monitoring of Resistance Spot Welding Process
    N. Haghshenas
    H. Moshayedi
    Experimental Techniques, 2020, 44 : 99 - 112
  • [50] Knowledge Platform for Resistance Spot Welding
    Ashtari, E.
    Semere, D.
    Melander, A.
    Loveborn, D.
    Hedegard, J.
    51ST CIRP CONFERENCE ON MANUFACTURING SYSTEMS, 2018, 72 : 1166 - 1171
12345