Optimization of Cutting Parameters for Face Milling Titanium Alloy Using MQL

被引：0
作者：
AHMED Hassan
姚振强
机构：
[1] Department of Manufacturing and Automation Shanghai Jiaotong University Shanghai 200030
[2] Department of Manufacturing and Automation Shanghai Jiaotong University Shanghai 200030
来源：
Journal of DongHua University | 2005年 / 02期
关键词：
Taguchi method; milling; titanium alloy; MQL;
D O I：
10.19884/j.1672-5220.2005.02.003
中图分类号：
TG580.6 [磨削加工工艺];
学科分类号：
080201 ; 080503 ;
摘要：
When using MQL as a cooling technique, many parameters have to be adjusted. The Taguchi method was used in this study to investigate the cutting characteristics of face milling of titanium alloys using PVD-coated inserts. To find the optimal volume removed and surface roughness, an orthogonal array, the signal-to-noise (S/N) ratio and the analysis of variance (ANOVA) were employed. The optimum cutting parameters was obtained. Throughout this study, it was found that the feed rate is the most influencing cutting parameter in the face milling of titanium alloys.
引用
收藏
页码：9 / 12
页数：4
相关论文
共 50 条
  • [21] Cutting parameters optimization for constant cutting force in milling
    Zhao, H.
    Li, J. G.
    Yao, Y. X.
    Liu, C. Q.
    [J]. E-ENGINEERING & DIGITAL ENTERPRISE TECHNOLOGY, 2008, 10-12 : 483 - 487
  • [22] Surface roughness modelling in finish face milling under MQL and dry cutting conditions
    Bruni, C.
    d'Apolito, L.
    Forcellese, A.
    Gabrielli, F.
    Simoncini, M.
    [J]. INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2008, 1 (Suppl 1) : 503 - 506
  • [23] Optimization of process parameters for turning of titanium alloy (Grade II) in MQL environment using multi-CI algorithm
    Apoorva Shastri
    Aniket Nargundkar
    Anand J. Kulkarni
    Luigi Benedicenti
    [J]. SN Applied Sciences, 2021, 3
  • [24] Parameters Optimization about Precision Milling Titanium Alloy TC4 Used for Aviation
    Wu Weihua
    Guo Yanyan
    Zhao Can
    Xu Tao
    Yang Jia
    [J]. ADVANCED MANUFACTURING TECHNOLOGY, PTS 1-4, 2012, 472-475 : 1818 - +
  • [25] Surface roughness modelling in finish face milling under MQL and dry cutting conditions
    C. Bruni
    L. d’Apolito
    A. Forcellese
    F. Gabrielli
    M. Simoncini
    [J]. International Journal of Material Forming, 2008, 1 : 503 - 506
  • [26] Study of tool wear progression using nano-hybrid Cryogenic MQL in milling titanium alloy
    Noor, Nurul Dayana Mohd
    Hadi, Musfirah Abdul
    [J]. JURNAL TRIBOLOGI, 2023, 37 : 76 - 83
  • [27] Optimization of cutting parameters using response surface methodology (RSM) in milling Inconel 718 superalloy using Borax-added nanofluid in (MQL) system
    Kursuncu, Bilal
    [J]. INDUSTRIAL LUBRICATION AND TRIBOLOGY, 2024, 76 (7/8) : 972 - 982
  • [28] Vibration analysis of cutting force in titanium alloy milling
    Sette Antonialli, Armando Italo
    Diniz, Anselmo Eduardo
    Pederiva, Robson
    [J]. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2010, 50 (01) : 65 - 74
  • [29] Helical Feed Milling with MQL for Boring of Aluminum Alloy
    Sasahara, Hiroyuki
    Kawasaki, Makoto
    Tsutsumi, Masaomi
    [J]. JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING, 2008, 2 (06): : 1030 - 1040
  • [30] Helical feed milling with MQL for boring of aluminum alloy
    Sasahara, Hiroyuki
    Kawasaki, Makoto
    Tsutsumi, Masaomi
    [J]. Nippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, 2003, 69 (08): : 2156 - 2161
12345