Wear resistance and corrosion resistance of VCp particle reinforced stainless steel composites

被引:0
|
作者
姚秀荣
韩杰才
左洪波
刘兆晶
李凤珍
任善之
机构
[1] China
[2] China College of Materials Science and Engineering
[3] Harbin 150001
[4] Harbin 150080
[5] Harbin Institute of Technology
[6] Harbin University of Science and Technology
[7] Institute of Composite Materials
关键词
VC_p; composite; white iron; stainles steel; wear resistance; corrosion resistance;
D O I
暂无
中图分类号
TG174 [腐蚀的控制与防护];
学科分类号
080503 ;
摘要
The VC_p reinforced stainless steel composite was produced by in-situ reaction casting. The composite was tested for its wear resistance under the wet abrasive condition and corrosion resistance, compared with the wear-resistant white iron and stainless steel. The results show that the wear resistance of the composite is slightly inferior to that of the white iron, but much better than that of the stainless steel under the wet grinding abrasive condition. The corrosion resistance of the composite is much better than that of the white iron in the acid medium, and a little worse than that of the stainless steel. Thus the composite exhibits superior properties of wear resistance and corrosion resistance.
引用
收藏
页码:51 / 56
页数:6
相关论文
共 50 条
  • [1] Wear resistance and corrosion resistance of VCp particle reinforced stainless steel composites
    Yao, XR
    Han, JC
    Zuo, HB
    Liu, ZJ
    Li, FZ
    Ren, SZ
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2005, 15 (05) : 1003 - 1008
  • [2] Enhanced Wear Resistance and Corrosion Resistance of 304 Austenitic Stainless Steel by Duplex Surface Treatment
    Shen, Qianqian
    Zhang, Yu
    Li, Xuesha
    Wang, Lili
    Nie, Chaoyin
    STEEL RESEARCH INTERNATIONAL, 2022, 93 (06)
  • [3] Biocompatibility, Corrosion Resistance, and Wear Resistance of TiNbZr-Based Composites Reinforced with Borides
    Ozerov, Maxim
    Sokolovsky, Vitaly
    Gazizova, Marina
    Povolyaeva, Elizaveta
    Tagirov, Damir
    Yapryntsev, Maxim
    Yunusov, Firuz
    Nadezhdin, Sergey
    METALS, 2025, 15 (03)
  • [4] Effect of siliconizing with molten salt on the wear resistance and corrosion resistance of AISI 302 stainless steel
    Xue, Juanqin
    Tao, Guanyu
    Tang, Changbin
    Xu, Nijun
    Li, Fagen
    Yin, Chengxian
    SURFACE & COATINGS TECHNOLOGY, 2020, 382 (382):
  • [5] Microstructure and wear resistance of in situ synthesized particle-reinforced novel stainless steel by laser melting deposition
    Wang, C.
    Zhang, C. H.
    Zhang, S.
    Wu, C. L.
    Zhang, J. B.
    Liu, Y.
    Pu, X. X.
    MATERIALS RESEARCH EXPRESS, 2019, 6 (08):
  • [6] Investigations of the effects of particle properties on the wear resistance of the particle reinforced composites using a novel wear model
    Prabhu, T. Ram
    INTERNATIONAL JOURNAL OF COMPUTATIONAL MATERIALS SCIENCE AND ENGINEERING, 2016, 5 (02)
  • [7] Effects of Interface on Wear Resistance in Fiber Reinforced Composites
    Liu, Zheng
    Liu, Xiao-mei
    NEW MATERIALS AND PROCESSES, PTS 1-3, 2012, 476-478 : 605 - 609
  • [8] Material condition tailored to plasma nitriding process for ensuring corrosion and wear resistance of austenitic stainless steel
    Koester, Katharina
    Kaestner, Peter
    Braeuer, Guenter
    Hoche, Holger
    Trossmann, Torsten
    Oechsner, Matthias
    SURFACE & COATINGS TECHNOLOGY, 2013, 228 : S615 - S618
  • [9] CORROSION RESISTANCE OF INTERFERENCE FILM ON STAINLESS STEEL
    张经磊
    侯保荣
    ChineseJournalofOceanologyandLimnology, 1997, (04) : 363 - 368
  • [10] Corrosion resistance of interference film on stainless steel
    Zhang Jing-lei
    K. Ogura
    W. Lou
    Hou Bao-rong
    Chinese Journal of Oceanology and Limnology, 1997, 15 (4): : 363 - 368