Dissimilar Al/Mg alloys friction stir lap welding with Zn foil assisted by ultrasonic

被引：1
|
作者：
Shude Ji [1 ]
Shiyu Niu [1 ]
Jianguang Liu [2 ]
机构：
[1] School of Aerospace Engineering,Shenyang Aerospace University
[2] Beijing Key Laboratory of Civil Aircraft Structures and Composite Materials,Beijing Aeronautical Science & Technology Research Institute of COMAC
来源：
JournalofMaterialsScience&Technology | 2019年 / 35卷 / 08期
基金：
中国国家自然科学基金;
关键词：
Dissimilar Al/Mg alloys; Friction stir lap welding; Zn foil; Ultrasonic power; Microstructures; Tensile shear load;
D O I：
暂无
中图分类号：
TG453.9 [];
学科分类号：
摘要：
The Zn-added ultrasonic assisted friction stir lap welding(UaFSLW) was carried out to improve the quality of dissimilar Al/Mg alloys joint. The effects of ultrasonic power on the joint quality were also investigated.The results indicated that the larger effective lap width and mixing region between Mg and Al(Mg/Al MR) were attained by Zn foil addition and external ultrasonic assistance. Compared with the conventional joint, the finer and better-distributed Mg-Zn IMCs placing the continuous Al-Mg IMCs were formed in the Mg/Al MR of the Zn-added UaFSLW joint. The Zn foil addition and external ultrasonic assistance significantly improved the tensile shear load of the joint, and the load was increased with the increase of the ultrasonic power. The maximum tensile shear load of 7.95 kN was attained, which was 52.6% larger than that of the conventional joint.
引用
收藏
页码：1712 / 1718
页数：7
相关论文
共 50 条
  • [1] Dissimilar Al/Mg alloys friction stir lap welding with Zn foil assisted by ultrasonic
    Ji, Shude
    Niu, Shiyu
    Liu, Jianguang
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2019, 35 (08) : 1712 - 1718
  • [2] Formation and microstructure of ultrasonic-assisted friction stir lap welding dissimilar Al/Ti alloys
    Mao Z.
    Wu S.
    Liu X.
    Hanjie Xuebao/Transactions of the China Welding Institution, 2019, 40 (02): : 145 - 148
  • [3] Friction stir lap welding of Al to Mg assisted by ultrasound and a Zn interlayer
    Ji, Shude
    Niu, Shiyu
    Liu, Jianguang
    Meng, Xiangchen
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2019, 267 : 141 - 151
  • [4] Effect of Welding Parameters on Al/Mg Dissimilar Friction Stir Lap Welding with and without Ultrasonic Vibration
    Zhao, Junjie
    Zhao, Bo
    Wu, Chuansong
    Muhammad, Najib Ahmad
    MATERIALS, 2024, 17 (09)
  • [5] Intermetallic Diminution During Friction Stir Welding of Dissimilar Al/Mg Alloys in Lap Configuration Via Ultrasonic Assistance
    Sachin Kumar
    Chuansong Wu
    Lei Shi
    Metallurgical and Materials Transactions A, 2020, 51 : 5725 - 5742
  • [6] Intermetallic Diminution During Friction Stir Welding of Dissimilar Al/Mg Alloys in Lap Configuration Via Ultrasonic Assistance
    Kumar, Sachin
    Wu, Chuansong
    Shi, Lei
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2020, 51 (11): : 5725 - 5742
  • [7] Effective joining of Mg/Ti dissimilar alloys by friction stir lap welding
    Li, Qinghua
    Ma, Zhongwei
    Ji, Shude
    Song, Qi
    Gong, Peng
    Li, Rui
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2020, 278
  • [8] Dislocation strain energy based modeling for ultrasonic effect on friction stir lap welding process of dissimilar Mg/Al alloys
    Zhai, Ming
    Wu, ChuanSong
    Shi, Lei
    Chen, GaoQiang
    Shi, QingYu
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 22 : 252 - 268
  • [9] Unravelling the ultrasonic effect on residual stress and microstructure in dissimilar ultrasonic-assisted friction stir welding of Al/Mg alloys
    Muhammad, Najib Ahmad
    Geng, Peihao
    Wu, ChuanSong
    Ma, Ninshu
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2023, 186
  • [10] Effect of ultrasonic field on microstructure evolution in friction stir welding of dissimilar Al/Mg alloys
    Zhao, Junjie
    Wu, ChuanSong
    Shi, Lei
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2022, 17 : 1 - 21
12345