Analytic estimation and numerical modeling of actively cooled thermal protection systems with nickel alloys

被引：0

作者：

Wang Xinzhi ^{[1
]}

He Yurong ^{[1
]}

Zheng Yan ^{[1
]}

Ma Junjun ^{[2
]}

H. Inaki Schlaberg ^{[3
]}

机构：

[1] School of Energy Science and Engineering, Harbin Institute of Technology

[2] Shanxi Blower (Group) Company Limited 3. School of Control and Computer Engineering, North China Electric Power University

来源：

Chinese Journal of Aeronautics | 2014年 / 27卷 / 06期

基金：

中国国家自然科学基金; 中央高校基本科研业务费专项资金资助;

关键词：

Active cooling; Electric analogy method; Nickel alloys; Thermal barrier coatings; Thermal protection systems;

D O I：

暂无

中图分类号：

V252.2 [有色金属（总论）];

学科分类号：

0805 ; 080502 ;

摘要：

Actively cooled thermal protection system has great influence on the engine of a hypersonic vehicle, and it is significant to obtain the thermal and stress distribution in the system. So an analytic estimation and numerical modeling are performed in this paper to investigate the behavior of an actively cooled thermal protection system. The analytic estimation is based on the electric analogy method and finite element analysis(FEA) is applied to the numerical simulation. Temperature and stress distributions are obtained for the actively cooled channel walls with three kinds of nickel alloys with or with no thermal barrier coating(TBC). The temperature of the channel wall with coating has no obvious difference from the one with no coating, but the stress with coating on the channel wall is much smaller than that with no coating. Inconel X-750 has the best characteristics among the three Ni-based materials due to its higher thermal conductivity, lower elasticity module and greater allowable stress. Analytic estimation and numerical modeling results are compared with each other and a reasonable agreement is obtained.

引用

页码：1401 / 1412

页数：12