Friction and wear of textured surfaces produced by 3D printing

被引:0
|
作者
HONG Yi [1 ]
ZHANG Peng [1 ]
LEE Kwang-Hee [1 ]
LEE Chul-Hee [1 ]
机构
[1] Department of Mechanical Engineering,Inha University
基金
新加坡国家研究基金会;
关键词
three-dimensional(3D) printing; texture; friction; wear;
D O I
暂无
中图分类号
TP391.73 [];
学科分类号
080201 ;
摘要
Surface texture patterns have great potential for improving tribological performance in terms of reducing friction and wear.The most common methods for surface texturing are laser and injection molding.The 3D printing method is also used to build parts,patterns,and molds that feature fine details for a wide range of applications because texture manufacturing by 3D printing is faster,more flexible,and less expensive than traditional techniques.To date,there has been no research on textured surfaces produced by 3D printing.Therefore,a new fabrication method using 3D printing to improve friction and wear properties is a topic worth exploring.In this study,a reciprocating friction tester was used to evaluate the friction and wear properties of different surface textures produced by 3D printing.The surface of specimens was examined by electron microscope and scanning electron microscope before and after the test.The results show that surface texturing can be applied to 3D printed parts to improve their friction and wear performance.
引用
收藏
页码:1400 / 1406
页数:7
相关论文
共 50 条
  • [1] Friction and wear of textured surfaces produced by 3D printing
    Yi Hong
    Peng Zhang
    Kwang-Hee Lee
    Chul-Hee Lee
    Science China Technological Sciences, 2017, 60 : 1400 - 1406
  • [2] Friction and wear of textured surfaces produced by 3D printing
    Hong, Yi
    Zhang, Peng
    Lee, Kwang-Hee
    Lee, Chul-Hee
    SCIENCE CHINA-TECHNOLOGICAL SCIENCES, 2017, 60 (09) : 1400 - 1406
  • [3] Comparison of textured nylon surfaces manufactured by CNC micromachining and 3D printing
    Ballesteros, Luis Miguel
    Cano, David
    Garcia, Camilo Andres
    Giraldo, Laura Vanessa
    Jimenez, Luis Felipe
    Rave, Esteban
    Rudas, J. S.
    Isaza, M. Cesar A.
    Toro, Alejandro
    SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES, 2024, 12 (01)
  • [4] WEAR AND COEFFICIENT OF FRICTION OF PLA-GRAPHITE COMPOSITE IN 3D PRINTING TECHNOLOGY
    Pawlak, W.
    ENGINEERING MECHANICS 2018 PROCEEDINGS, VOL 24, 2018, : 649 - 652
  • [5] Investigation on wear of biopolymer parts produced by 3D printing in lubricated sliding conditions
    Zagorski, Mihail
    Todorov, Georgi
    Nikolov, Nikolay
    Sofronov, Yavor
    Kandeva, Mara
    INDUSTRIAL LUBRICATION AND TRIBOLOGY, 2022, 74 (03) : 360 - 366
  • [6] Roughness analysis of electrochemically textured surfaces: effects on friction and wear of lubricated contacts
    Rodrigues, T. A.
    Arencibia, R., V
    Costa, H. L.
    da Silva, W. M.
    SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES, 2020, 8 (02):
  • [7] A study on effect of laser textured cast iron surfaces on reducing friction and wear
    Lazim, N. A. M.
    Kamal, S. E. M.
    Hasan, R.
    PROCEEDINGS OF MALAYSIAN INTERNATIONAL TRIBOLOGY CONFERENCE 2015, 2015, : 273 - 274
  • [8] The Influence of the 3D Printing Infill and Printing Direction on Friction and Wear of Polylactic Acid (PLA) under Rotational Sliding
    F. Zivic
    S. Mitrovic
    N. Grujovic
    Z. Jovanovic
    D. Dzunic
    S. Milenkovic
    Journal of Friction and Wear, 2021, 42 : 106 - 111
  • [9] The Influence of the 3D Printing Infill and Printing Direction on Friction and Wear of Polylactic Acid (PLA) under Rotational Sliding
    Zivic, F.
    Mitrovic, S.
    Grujovic, N.
    Jovanovic, Z.
    Dzunic, D.
    Milenkovic, S.
    JOURNAL OF FRICTION AND WEAR, 2021, 42 (02) : 106 - 111
  • [10] Friction properties of graphite coating deposited on wedge-shaped textured aluminum alloys prepared by 3D printing
    Yin, Hongze
    Chen, Wengang
    Xia, Dongsheng
    Wu, Huajie
    Jing, Peiyao
    Chen, Long
    Zhang, Luzhong
    Wang, Yuhao
    Wang, Zexiao
    Li, Dongyang
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2022, 20 : 4452 - 4472