Effect of Carbon Nanotube on Damping Properties of Epoxy

被引:0
作者
Naser Kordani [1 ,2 ]
Abdolhosein Fereidoon [1 ,2 ]
Mohammadreza Ashoori [1 ,2 ]
机构
[1] Department of Mechanical Engineering
[2] Semnan University,Semnan -,Iran
关键词
Damping; epoxy; nano composites; nanotubes;
D O I
暂无
中图分类号
TB383.1 [];
学科分类号
070205 ; 080501 ; 1406 ;
摘要
In a nanocomposite structure,it is anticipated that high damping can be achieved by taking advantage of the interfacial friction between the nanotubes and the polymer.The purpose of this paper is to investigate the structural damping characteristics of polymeric composites containing Carbon nanotubes(CNTs) with various kinds and amounts.The damping characteristics of the specimens with 0 wt% and 0.5 wt% nanotube contents were computed experimentally.Through comparing with neat resin specimens,the study showed that one can enhance damping by adding CNT fillers into polymeric resins.Similarly experiment showed that the maximum value of damping ratio was obtained at 0.5 wt%.
引用
收藏
页码:25 / 30
页数:6
相关论文
共 5 条
[1]   Influence of nano-modification on the mechanical and electrical properties of conventional fibre-reinforced composites [J].
Gojny, FH ;
Wichmann, MHG ;
Fiedler, B ;
Bauhofer, W ;
Schulte, K .
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2005, 36 (11) :1525-1535
[2]   Multifunctional structural reinforcement featuring carbon nanotube films [J].
Koratkar, NA ;
Wei, BQ ;
Ajayan, PM .
COMPOSITES SCIENCE AND TECHNOLOGY, 2003, 63 (11) :1525-1531
[3]  
Processing, structure, and properties of fibers from polyester/carbon nanofiber composites[J] . Hongming Ma,Jijun Zeng,Mary Lynn Realff,Satish Kumar,David A. Schiraldi.Composites Science and Technology . 2003 (11)
[4]   Equivalent-continuum modeling of nano-structured materials [J].
Odegard, GM ;
Gates, TS ;
Nicholson, LM ;
Wise, KE .
COMPOSITES SCIENCE AND TECHNOLOGY, 2002, 62 (14) :1869-1880
[5]   Development of a dispersion process for carbon nanotubes in an epoxy matrix and the resulting electrical properties [J].
Sandler, J ;
Shaffer, MSP ;
Prasse, T ;
Bauhofer, W ;
Schulte, K ;
Windle, AH .
POLYMER, 1999, 40 (21) :5967-5971