A photothermal reservoir for highly efficient solar steam generation without bulk water

A solid photothermal reservoir is designed to implement solar-steam generation in the absence of bulk water. The photothermal reservoir is composed of a water absorbing core encapsulated by a photothermal reduced graphene oxide based aerogel sheet which absorbs light and converts it into heat thus evaporating the stored water. The photothermal reservoir is able to store 6.5 times its own weight in water,which is sufficient for one day solar evaporation, thus no external water supplement is required. During solar-steam generation, since no bulk water is involved, the photothermal reservoir minimizes heat conduction loss, and maximizes both of the exposed evaporation surface area and net energy gain from the environment, leading to an energy efficiency beyond the theoretical limit. An extremely high water evaporation rate of 4.0 kg m-2h-1(normalized to projection area) is achieved in laboratory studies over a cylinder photothermal reservoir with a diameter of 5.2 cm and a height of 15 cm under 1.0 sun irradiation. Practical evaluation of the photothermal reservoir outdoors as part of a desalination device demonstrates a similar evaporation rate where the salinity of the clean water produced is lower than 24 ppb.Thus the photothermal reservoir shows great potential for real world applications in portable solarthermal desalination.