Static oxidation behaviour of silicide coating on niobium alloy at high temperature

被引:3
作者
肖来荣
许谅亮
易丹青
刘会群
蔡志刚
机构
[1] Changsha 410083
[2] China
[3] Key Laboratory of Nonferrous Metal Materials Science and Engineering
[4] Ministry of Education
[5] School of Materials Science and Engineering Central South University
关键词
niobium alloy; silicide coating; static oxidation; diffusion; phase transformation;
D O I
暂无
中图分类号
TG174.4 [金属表面防护技术];
学科分类号
080503 ;
摘要
A silicide coating was prepared on the surface of the Nb521 alloy by the complex pack cemented method. The oxidation resistance properties of the present coating were examined by the static oxidation tests at 1 700 ℃ in air. The compositions and the microstructures of the coating before and after test were characterised and analysed through scanning electron microscopy(SEM),X-ray diffraction analysis(XRD),energy dispersive X-ray spectrometry(EDS) and electron probe microanalysis(EPMA),respectively. The present silicide coating can provide an effective protection for the Nb alloy for 25 h at 1 700 ℃ in air. The results show that the oxidation kinetics of the present silicide coating is parabolic. The diffusion of Si leads to the phase transformation and evolution during the oxidation.
引用
收藏
页码:760 / 765
页数:6
相关论文
共 7 条
  • [1] Protective Effect of the Sputtered TiAlCrAg Coating on the High-Temperature Oxidation and Hot Corrosion Resistance of Ti-Al-Nb Alloy[J]. Yanjun XI, Fuhui WANG and Lianlong HEState Key Laboratory for Corrosion & Protection, Institute of Metai Research, Chinese Academy of Sciences, Shenyang 110016, ChinaShenyang National Laboratory for Materials Science, Institute of Metai Research, Chinese Academy of Sciences, Shenyang 110016, China.Journal of Materials Science & Technology. 2004(06)
  • [2] Microstructure and high temperature mechanical properties of mechanically alloyed Nb3Al-based materials
    Dollár, A
    Dymek, S
    [J]. INTERMETALLICS, 2003, 11 (04) : 341 - 349
  • [3] Mechanical properties of As-cast and directionally solidified Nb-Mo-W-Ti-Si in-situ composites at high temperatures[J] . Jiangbo Sha,Hisatoshi Hirai,Hidetoshi Ueno,Tatsuo Tabaru,Akira Kitahara,Shuji Hanada.Metallurgical and Materials Transactions A . 2003 (1)
  • [4] NbSi 2 coating on niobium using molten salt[J] . Ryosuke O Suzuki,Masayori Ishikawa,Katsutoshi Ono.Journal of Alloys and Compounds . 2002 (1)
  • [5] Microstructure and room temperature deformation of Nbss/Nb5Si3 in situ composites alloyed with Mo
    Kim, WY
    Tanaka, H
    Kasama, A
    Tanaka, R
    Hanada, S
    [J]. INTERMETALLICS, 2001, 9 (06) : 521 - 527
  • [6] New silicides for new niobium protective coatings[J] . M Vilasi,M Francois,R Podor,J Steinmetz.Journal of Alloys and Compounds . 1998 (1)
  • [7] Microstructure and mechanical properties of MoSi 2 coatings produced by laser processing[J] . A. Hidouci,J.M. Pelletier.Materials Science & Engineering A . 1998 (1)