Filling technique for keyhole of friction stir spot welding based on the principles of resistance spot welding

Keyhole at the end of a weld prepared by friction stir welding(FSW) is one of the major issues that impede the application of FSW. To address this issue, a keyhole filling technique was proposed in this paper, which is based on the principles of resistance spot welding(RSW). A three-phase secondary rectifier resistance spot welder was applied as the experimental instrument for filling the keyhole in the center of friction stir spot weld(FSSW). The test sheet is a 2024-T4 aluminium alloy with a thickness of 6.0 mm. The experiments results show that the filled joint strength is improved by 26.12% since the area is increased for the plug in the keyhole. And there are two kinds of dimples in the tensile fracture—equiaxial dimples and long dimples. The filled joint involves the fusion welding zone(FWZ), pressure welding zone(PWZ), melted plug zone(MPZ), and plastic deformation zone(PDZ). The FWZ and the PWZ is the melting bond and diffusion bond between the plug and keyhole, respectively. The MPZ is the center part and the PDZ is upper or lower part of the plug.