Comparison of Structures and Properties between Wool and Ramie Fibers Treated by Atmospheric Pressure Ar and Ar/O2 Plasma

被引：0

作者：

王越平 ^{[1
,2
]}

徐向宇 ^{[3
]}

王守国 ^{[3
]}

张晓丹 ^{[2
]}

赵伶利 ^{[3
]}

史丽敏 ^{[2
]}

高绪珊 ^{[2
]}

机构：

[1] Textile College,Sichuan University

[2] Beijing Key Laboratory of Clothing Materials R&D and Assessment,Beijing Institute of Clothing Technology

[3] Academy of Opto-Electronics,Chinese Academy of Science

来源：

Journal of Donghua University(English Edition) | 2009年 / 26卷 / 02期

关键词：

atmospheric pressure plasma; Ar plasma; Ar/O2; plasma; wool fiber; ramie fiber; structural characteristic; property;

D O I：

10.19884/j.1672-5220.2009.02.020

中图分类号：

TS195.5 [化学整理];

学科分类号：

082103 ;

摘要：

The technique of atmospheric pressure plasma is of value in textile industry.In this paper,argon(Ar)and argon/oxygen(Ar/O2)atmospheric pressure plasma were used to treat wool and ramie fibers.The structures and properties of treated fibers were investigated by means of SEM,XPS,single fiber tensile tester and so on.The results proved that the effects of plasma treatments depended on structural characteristics of fibers to a great extent,besides conditions of plasma treatment.By atmospheric pressure plasma treatment,wool fiber had significant changes in morphology structure,surface chemical component,mechanic properties and dyeability,while ramie fiber just showed a little change.In additional,Ar/O2 plasma showed more effective action than argon.And at the beginning of treatment,plasma brought about remarkable effects,which did not increase with prolonging of treat time.

引用

页码：216 / 220

页数：5

共 50 条

[1] Comparison of the surface characteristics of polypropylene films treated by Ar and mixed gas (Ar/O2) atmospheric pressure plasma
Kwon, OJ
Myung, SW
Lee, CS
Choi, HS
JOURNAL OF COLLOID AND INTERFACE SCIENCE, 2006, 295 (02) : 409 - 416
[2] A comparison between micro hollow cathode discharges and atmospheric pressure plasma jets in Ar/O2 gas mixtures
Lazzaroni, C.
Chabert, P.
PLASMA SOURCES SCIENCE & TECHNOLOGY, 2016, 25 (06)
[3] Relationship between anti-felting properties and physicochemical properties of wool fibers treated with Ar-plasma
Mori, Masukuni
Inagaki, Norihiro
TEXTILE RESEARCH JOURNAL, 2006, 76 (09) : 687 - 694
[4] Discharge characteristics and reactive species diagnosis of a He + Ar + O2 plasma jet at atmospheric pressure
He, Tongtong
Wang, Yunzheng
Chen, Zeyu
Zheng, Yuesheng
EUROPEAN PHYSICAL JOURNAL D, 2024, 78 (06)
[5] On the Electrical Characteristic of Atmospheric Pressure Air/He/O2/N2/Ar Plasma Needle
Xiong, Zilan
Huang, Quanjun
Wang, Zhan
Lu, Xinpei
Pan, Yuan
IEEE TRANSACTIONS ON PLASMA SCIENCE, 2013, 41 (07) : 1746 - 1750
[6] Transportation of ROS in model tissues treated by an Ar + O2 plasma jet
He, Tongtong
Liu, Dingxin
Liu, Zhijie
Wang, Sui
Liu, Zhichao
Rong, Mingzhe
Kong, Michael G.
JOURNAL OF PHYSICS D-APPLIED PHYSICS, 2019, 52 (04)
[7] Evaluation of surface and bonding properties of cold rolled steel sheet pretreated by Ar/O2 atmospheric pressure plasma at room temperature
Lee, C. J.
Lee, S. K.
Ko, D. C.
Kim, D. J.
Kim, B. M.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2009, 209 (10) : 4769 - 4775
[8] Studies on the Surface of PTFE Membranes Treated with Atmospheric Pressure Low Temperature Plasma of Ar and Ar/H2
Akashi, Naohisa
Hosoi, Katsuhiko
Kuroda, Shin-ichi
ADVANCES IN TEXTILE ENGINEERING AND MATERIALS IV, 2014, 1048 : 440 - 443
[9] The Evaluation of Surface and Adhesive Bonding Properties for Cold Rolled Steel Sheet for Automotive Treated by Ar/O-2 Atmospheric Pressure Plasma
Lee, Chan-joo
Lee, Sang-kon
Kim, Byung-min
TRANSACTIONS OF THE KOREAN SOCIETY OF MECHANICAL ENGINEERS A, 2008, 32 (04) : 354 - 361
[10] Numerical simulation of inductively coupled Ar/O2 plasma*
Zhang Yu-Han
Zhao Xin-Qian
Liang Ying-Shuang
Guo Yuan-Yuan
ACTA PHYSICA SINICA, 2024, 73 (13)

← 1 2 3 4 5 →