Flow softening and dynamic recrystallization behavior of a Mg-Gd-Y-Nd-Zr alloy under elevated temperature compressions

被引:0
|
作者
Yiping WU [1 ]
Yuzhen JIA [2 ]
Sha Zhang [1 ]
Yu Liu [1 ]
Hanqing Xiong [1 ]
Gang Chen [3 ]
机构
[1] Department of Mechanical and Electrical Engineering, Changsha University
[2] Bichamp Cutting Technology (Hunan) Co., Ltd
[3] College of Material Science and Engineering, Hunan University
关键词
D O I
暂无
中图分类号
TG146.22 [];
学科分类号
080502 ;
摘要
Flow softening behavior of a homogenized Mg-7Gd-4Y-1Nd-0.5Zr alloy under compression to a final strain of~1.8 at elevated temperatures of 450~550℃ and a constant strain rate of 2s-1has been investigated by optical microscopy,scanning electron microscopy,electron back-scattered diffraction and transmission electron microscopy.The results show that true stress first rises to the peak point and then drops to the bottom value and increases again with further increasing strain at each temperature.Twinning dynamic recrystallization(DRX) and continuous DRX contribute to the formation of new fine grains at temperatures 450~475℃ when the restoration is caused by both DRX and texture change due to extension twinning,resulting in the larger softening degrees compared with the softening effects owing to continuous DRX and discontinuous DRX at 500~550℃ when twinning activation is suppressed.500℃ is the transition temperature denoting a significant decline in the contribution of twinning and TDRX to the strain with increasing temperature.The cuboid-shape phase exists in both homogenized and compressed samples,while the compositions are varied.
引用
收藏
页码:2891 / 2900
页数:10
相关论文
共 50 条
  • [31] Mg-Gd-Y-Nd-Zr合金的高温固溶研究
    仲莹莹
    沈枫
    杨京
    李文瑛
    航天制造技术, 2011, (02) : 33 - 36
  • [32] Impact Toughness of Mg-Gd-Y-Nd-Zr Extruded Plate with Second Phase
    Tang, Changping
    Zhang, Chao
    Liu, Wenhui
    Chen, Xu
    Liu, Xiao
    Xiyou Jinshu/Chinese Journal of Rare Metals, 2023, 47 (02): : 218 - 228
  • [33] Mg-Gd-Y-Nd-Zr合金铸锭均匀化工艺研究
    赵龙
    乔金虎
    于建民
    侯贵先
    杜秀丽
    轻合金加工技术, 2013, 41 (11) : 25 - 28+40
  • [34] Mg-Gd-Y-Nd-Zr合金棒材热轧工艺研究
    李之恒
    郭拉凤
    李彩霞
    热加工工艺, 2015, 44 (09) : 124 - 127
  • [35] Study of flow stress in Mg-Gd-Y-Nd-Zr alloys based on IWOA-BPNN model
    Qin, Haoze
    Kang, Shuang
    Tang, Wanru
    Liu, Zheng
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2024, 30 : 2848 - 2857
  • [36] Static Recrystallization Behavior of Mg–Gd–Y–Zn–Zr Alloy During Annealing Treatment
    Zeru Wu
    Jianmin Yu
    Ziwei Zhang
    Hongbing Hu
    Zhimin Zhang
    JOM, 2022, 74 : 2566 - 2576
  • [37] Analysis on micro-structure and mechanical properties of Mg-Gd-Y-Nd-Zr alloy and its reinforcement mechanism
    Liu Qiuzu
    Ding Xiaofeng
    Liu Yanping
    Wei Xiaojia
    JOURNAL OF ALLOYS AND COMPOUNDS, 2017, 690 : 961 - 965
  • [38] Elevated-temperature impact toughness of Mg-(Gd, Y)-Zr alloy
    Mu, Y. L.
    Wang, Q. D.
    Hu, M. L.
    Janik, V.
    Yin, D. D.
    SCRIPTA MATERIALIA, 2013, 68 (11) : 885 - 888
  • [39] The High Temperature Oxidation Behavior of Mg-Gd-Y-Zr Alloy
    Liu, Junwei
    Li, Ying
    Wang, Fuhui
    OXIDATION OF METALS, 2009, 71 (5-6): : 319 - 334
  • [40] Grain Refinement, Microstructure and Mechanical Properties Homogeneity of Mg-Gd-Y-Nd-Zr Alloy During Multidirectional Forging
    Xia, Xiangsheng
    Wang, Changpeng
    Wu, Yang
    Zhang, Kui
    Ma, Minglong
    Yuan, Baoguo
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2018, 27 (11) : 5689 - 5699