THE PARTICLE VELOCITY DISTRIBUTION IN A RISER OF DILUTE CIRCULATING FLUIDIZED BED

被引：0
|
作者：
杨勇林
金涌
俞芷青
汪展文
白丁荣
机构：
[1] Beijing
[2] Dept.of Chem.Eng. Tsinghua University
来源：
Journal of Chemical Industry and Engineering | 1991年 / 02期
关键词：
In; THE PARTICLE VELOCITY DISTRIBUTION IN A RISER OF DILUTE CIRCULATING FLUIDIZED BED; CFB;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
This paper presents an experimental study on the radial and axial profiles of local particle velocity of flu-idized catalyst(FCC)particles in a circulating fluidized bed of 8000mm in height and 186mm in inside diameterwith a Fiber-Optic Probe Laser Doppler Velocimetry.It has been found that the radial profiles of local particlevelocity are parabolic,even in the centre region and steep in the region near the bed wall,and that the length ofparticle acceleration along the bed height is longer than expected.The following formula has been recommended to correlate the 1 ocal particle velocity with dilute gas-solidflow in the bed:where a,b,c and e are functions of radial positions.
引用
收藏
页码：182 / 191
页数：10
相关论文
共 50 条
  • [31] The residence time distribution and mixing of the gas phase in the riser of a circulating fluidized bed
    Mahmoudi, S.
    Seville, J. P. K.
    Baeyens, J.
    POWDER TECHNOLOGY, 2010, 203 (02) : 322 - 330
  • [32] Development of the bed particle size distribution in a circulating fluidized bed combustor
    Klett, Cornelis
    Hartge, Ernst-Ulrich
    Werther, Joachim
    Proceedings of the 18th International Conference on Fluidized Bed Combustion, 2005, : 495 - 503
  • [33] CHARACTERIZING NONUNIFORMITIES IN GAS-PARTICLE FLOW IN THE RISER OF A CIRCULATING FLUIDIZED-BED
    RHODES, MJ
    LAUSSMANN, P
    POWDER TECHNOLOGY, 1992, 72 (03) : 277 - 284
  • [34] Local solid particle behavior inside the upper zone of a circulating fluidized bed riser
    Zaabout, Abdelghafour
    Bournot, Herve
    Occelli, Rene
    Kharbouch, Bousselham
    ADVANCED POWDER TECHNOLOGY, 2011, 22 (03) : 375 - 382
  • [35] A novel method for isokinetic measurement of particle flux within the riser of a circulating fluidized bed
    Coronella, CJ
    Deng, JX
    POWDER TECHNOLOGY, 1998, 99 (03) : 211 - 219
  • [36] A novel method for isokinetic measurement of particle flux within the riser of a circulating fluidized bed
    Dept. of Chem. and Metall. Eng., MS 170, University of Nevada, Reno, Reno, NV 89557-0136, United States
    Powder Technol., 3 (211-219):
  • [37] Characteristics of axial and radial segregation of single and mixed particle system based on terminal settling velocity in the riser of a circulating fluidized bed
    Das, Mitah
    Meikap, B. C.
    Saha, R. K.
    CHEMICAL ENGINEERING JOURNAL, 2008, 145 (01) : 32 - 43
  • [38] Pressure and solid distributions in the riser of a circulating fluidized bed
    Luckos, A
    den Hoed, P
    Circulating Fluidized Bed Technology VIII, 2005, : 231 - 238
  • [39] Drying kinetics in the riser of circulating fluidized bed with internals
    Balasubramanian, N.
    Srinivasakannan, C.
    Basha, C. Ahmed
    DRYING TECHNOLOGY, 2007, 25 (10) : 1595 - 1599
  • [40] CFD-simulation of a circulating fluidized bed riser
    Ernst-Ulrich Hartge
    Lars Ratschow
    Reiner Wischnewski
    Joachim Werther
    Particuology, 2009, 7 (04) : 283 - 296
12345