Numerical Simulation of Spray Characteristics of an Effervescent Atomizer

被引:0
|
作者
XIAO Ji-ming
机构
关键词
minimal quantity lubrication; effervescent atomization; spray characteristics; numerical simulation;
D O I
10.13434/j.cnki.1007-4546.2009.02.001
中图分类号
TB126 [工程流体力学];
学科分类号
080704 ;
摘要
Using fluid dynamics software Fluent,the spray characteristics of an effervescent atomizer in a downstream flow field was simulated and analyzed,the results show that on the cross sections of the atomizer downstream flow field,the distribution of the atomized droplet size is small and mainly concentrated about Sauter mean diameter(SMD),and the distribution of the axial velocity is large,but mainly concentrated about the gas peak velocity in the closer nozzle axis area;the gas peak velocity of the atomized droplet increases,while the droplet SMD decreases with increase of the nozzle caliber and the air pressure;with the increase of the flow rate of cutting fluid,the atomized droplet SMD increases,while the gas peak velocity rises first and then decreases,but the decrease trend is very small after the air pressure is more than 0.4 MPa.The simulation results have significance in guiding for designing and applying the effervescent atomizer.
引用
收藏
页码:108 / 112
页数:5
相关论文
共 50 条
  • [21] Numerical investigation of spray characteristics of an air-blast atomizer with dynamic mesh
    Shafaee, Maziar
    Mahmoudzadeh, Sajad
    AEROSPACE SCIENCE AND TECHNOLOGY, 2017, 70 : 351 - 358
  • [22] Influence of feed viscosity on the two-phase flow inside the exit orifice of an effervescent atomizer and on resulting spray characteristics
    Staehle, P.
    Gaukel, V.
    Schuchmann, H. P.
    FOOD RESEARCH INTERNATIONAL, 2015, 77 : 55 - 62
  • [23] Spray performance and steadiness of an effervescent atomizer and an air-core-liquid-ring atomizer for application in spray drying processes of highly concentrated feeds
    Wittner, Marc O.
    Karbstein, Heike P.
    Gaukel, Volker
    CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION, 2018, 128 : 96 - 102
  • [24] Atomization characteristics of spray-to-spray impinging atomizer
    Hayashi, Keiichi
    Ohara, Kiyoshi
    Nihon Enerugi Gakkaishi/Journal of the Japan Institute of Energy, 1999, 78 (04): : 275 - 279
  • [25] Effervescent Atomizer as Novel Cell Spray Technology to Decrease the Gas-to-Liquid Ratio
    Thiebes, Anja Lena
    Klein, Sarah
    Zingsheim, Jonas
    Moeller, Georg H.
    Guerzing, Stefanie
    Reddemann, Manuel A.
    Behbahani, Mehdi
    Jockenhoevel, Stefan
    Cornelissen, Christian G.
    PHARMACEUTICS, 2022, 14 (11)
  • [26] A HOLOGRAPHIC INVESTIGATION OF THE NEAR-NOZZLE STRUCTURE OF AN EFFERVESCENT ATOMIZER-PRODUCED SPRAY
    SANTANGELO, PJ
    SOJKA, PE
    ATOMIZATION AND SPRAYS, 1995, 5 (02) : 137 - 155
  • [27] Numerical simulation on spray characteristics of ether fuels
    Mohan, Balaji
    Yang, Wenming
    Yu, Wenbin
    Tay, Kun Lin
    Chou, Siaw Kiang
    CLEAN, EFFICIENT AND AFFORDABLE ENERGY FOR A SUSTAINABLE FUTURE, 2015, 75 : 919 - 924
  • [28] NUMERICAL SIMULATION OF THE FLOW CHARACTERISTICS WITHIN A PRESSURE-SWIRLING ATOMIZER
    Xie, Kaicheng
    Mao Ronghai
    Zhu, Ying
    Shang, Mingtao
    Wu, Hao
    PROCEEDINGS OF THE ASME TURBO EXPO: TURBINE TECHNICAL CONFERENCE AND EXPOSITION, 2014, VOL 4B, 2014,
  • [29] Numerical study of kerosene spray and combustion characteristics using an air-blast atomizer
    Ibrahim, I. A.
    Elzallat, A. M.
    Elsakka, M. M.
    Farag, T. M.
    Gad, H. M.
    ENERGY REPORTS, 2022, 8 : 5974 - 5986
  • [30] Novel atomizer concept for CCS applications: Impinging effervescent atomizer
    Cejpek, Ondrej
    Maly, Milan
    Dhinasekaran, Vignesh Kumar
    Avulapati, Madan Mohan
    Dacanay, Louis
    Jedelsky, Jan
    SEPARATION AND PURIFICATION TECHNOLOGY, 2023, 311