Low-cycle fatigue lifetime estimation of Ti–6Al–4V welded joints by a continuum damage mechanics model

被引：1

作者：

Hong-Yu Qi ^{[1
]}

Xiao-Lei Zheng ^{[1
]}

Xiao-Guang Yang ^{[1
]}

机构：

[1] School of Energy and Power Engineering,Beihang University

来源：

RareMetals | 2016年 / 35卷 / 04期

关键词：

Electron beam welding; Low-cycle fatigue; Life estimation; Continuum damage mechanics;

D O I：

暂无

中图分类号：

TG407 [焊接接头的力学性能及其强度计算];

学科分类号：

080201 ; 080503 ;

摘要：

The low-cycle fatigue(LCF)behavior of directionally solidified nickel-based superalloy Ti–6Al–4V was studied under bare and electron beam welding conditions at room temperature.Results show that:(1)under the same test conditions,all the joints exhibit lower LCF lifetime than Ti–6Al–4V;(2)the failure of welded structures is mainly ascribed to the welding defect.A novel lifetime prediction methodology based on continuum damage mechanics is proposed to predict the lifetime of Ti–6Al–4V and its welded joints.

引用

页码：299 / 302

页数：4

共 50 条

[41] Fatigue life prediction for LPBF-fabricated Ti-6Al-4V up to very-high-cycle regime based on continuum damage mechanics incorporating effect of defects
Ling, Chao
Jia, Yinfeng
Fu, Rui
Zheng, Liang
Zhong, Zheng
Hong, Youshi
INTERNATIONAL JOURNAL OF FATIGUE, 2024, 181
[42] Low Cycle Fatigue Behaviors of TI-6AL-4V Alloy Controlled by Strain and Stress
Wang, Ruifeng
Li, Youtang
An, Huping
ADVANCES IN FRACTURE AND DAMAGE MECHANICS XI, 2013, 525-526 : 441 - +
[43] Crack mode and life of Ti-6Al-4V under multiaxial low cycle fatigue
Itoh, Takamoto
Sakane, Masao
Morishita, Takahiro
Nakamura, Hiroshi
Takanashi, Masahiro
FRATTURA ED INTEGRITA STRUTTURALE, 2015, (34): : 487 - 497
[44] Microstructural features of Ti-6Al-4V manufactured via high power laser directed energy deposition under low-cycle fatigue
Ren, Y. M.
Lin, X.
Yang, H. O.
Tan, H.
Chen, J.
Jian, Z. Y.
Li, J. Q.
Huang, W. D.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2021, 83 : 18 - 33
[45] Tensile and fatigue properties of electron beam welded dissimilar joints between Ti-6Al-4V and BT9 titanium alloys
Wang, S. Q.
Liu, J. H.
Chen, D. L.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 584 : 47 - 56
[46] Low cyclic fatigue behavior of electron-beam-welded Ti-6Al-4V titanium joint
Qi, Hong-Yu
Ma, Li-Qiang
Li, Shao-Lin
Yang, Xiao-Guang
RARE METALS, 2016, 35 (03) : 230 - 234
[47] Fatigue Performance of Gas Tungsten Arc, Electron Beam, and Laser Beam Welded Ti-6Al-4V Alloy Joints
Balasubramanian, T. S.
Balasubramanian, V.
Muthumanikkam, M. A.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2011, 20 (09) : 1620 - 1630
[48] Fatigue Performance of Gas Tungsten Arc, Electron Beam, and Laser Beam Welded Ti-6Al-4V Alloy Joints
T. S. Balasubramanian
V. Balasubramanian
M. A. Muthumanikkam
Journal of Materials Engineering and Performance, 2011, 20 : 1620 - 1630
[49] Comparison of low-cycle fatigue properties of two kinds of high energy beam welded joints of TC4 alloy
Long, Jian
Zhang, Lin-jie
Zhu, Lei
Zhang, Li-xu
Wu, Jun
Zhuang, Ming-xiang
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2023, 33 (11) : 3376 - 3386
[50] Predicting the low-cycle fatigue life of Ti-6Al-4V alloy using backpropagation neural network optimized by the improved dung beetle algorithm
Gao, Zihao
Zhu, Changsheng
Shu, Yafeng
Wang, Shaohui
Wang, Canglong
Chen, Yupeng
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2024, 47 (11) : 3983 - 3999

← 1 2 3 4 5 →