Effect of Hot Working on Secondary Phase Formation in 2205 Duplex Stainless Steel

被引:0
|
作者
A.Momeni [1 ]
K.Dehghani [1 ]
机构
[1] Department of Mining and Metallurgy,Amir Kabir University of Technology
关键词
Duplex stainless steel; Aging; Hot working; σ; phase;
D O I
暂无
中图分类号
TG161 [钢的热处理];
学科分类号
080201 ; 080503 ;
摘要
In this research,aging treatments at temperatures of 800 and 900°C for different aging time of 5-60 min were conducted on solution treated as well as hot worked samples of 2205 dual phase stainless steel.The effect of aging treatment on precipitation of intermetallic phases was investigated in undeformed specimens and those subjected to hot deformation with different strain rates of 0.001-1 s-1.It was found that σ precipitation increased by hot working.It was also concluded that the volume fraction of phase increased with deformation temperature and decreased with strain rate.The precipitation of intermetallic phases(i.e.σ and χ) was analyzed by an Avrami-type kinetics equation of %(σ+χ)=A(1-exp(-ktn)) and the values of n and ln k were estimated for different thermomechanical regimes.The values of n were assessed to increase from 0.4 to 1 with strain rate in the studied range.Otherwise,It was also understood that ln k decreased with strain rate.Microstructural observations by means of optical microscopy and scanning electron microscopy showed that σ particles mostly nucleated at the ferrite-austenite interfaces.But no sign of χ-phase could be seen.This fortified the idea of certain literature that χ-phase always forms at early stages of aging and consumes through the precipitation of σ.
引用
收藏
页码:851 / 857
页数:7
相关论文
共 50 条
  • [31] Mechanical characterization of phases in Duplex 2205 stainless steel by nanoindentation technique
    El Mehtedi, M.
    Spigarelli, S.
    Ricci, P.
    Paternoster, C.
    Quadrini, E.
    METALLURGIA ITALIANA, 2010, (09): : 11 - 16
  • [32] Hydrogen behavior in SAF 2205 duplex stainless steel
    Silverstein, R.
    Sobol, O.
    Boellinghaus, Th.
    Unger, W.
    Eliezer, D.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2017, 695 : 2689 - 2695
  • [33] The effect of thermal cycling in superplastic diffusion bonding of 2205 duplex stainless steel
    Li, Shuxia
    Ren, Xueping
    Hou, Hongliang
    MATERIALS & DESIGN, 2015, 86 : 582 - 586
  • [34] Effect of selective dissolution on fatigue crack initiation in 2205 duplex stainless steel
    Lo, I-Hsuang
    Tsai, Wen-Ta
    CORROSION SCIENCE, 2007, 49 (04) : 1847 - 1861
  • [35] Effect of Shot Peening on the Corrosion and Wear Resistance of 2205 Duplex Stainless Steel
    Wu, Yi
    Kang, Yonghai
    Chen, Youming
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2023, 32 (07) : 3186 - 3201
  • [36] Comparison between symmetric and asymmetric hot rolling techniques performed on duplex stainless steel 2205
    Mapelli, C.
    Barella, S.
    Mombelli, D.
    Baldizzone, C.
    Gruttadauria, A.
    INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2013, 6 (03) : 327 - 339
  • [37] Comparison between symmetric and asymmetric hot rolling techniques performed on duplex stainless steel 2205
    C. Mapelli
    S. Barella
    D. Mombelli
    C. Baldizzone
    A. Gruttadauria
    International Journal of Material Forming, 2013, 6 : 327 - 339
  • [38] Pitting corrosion resistance of sensitized type 2205 duplex stainless steel in hot concentrated seawater
    Zeng, Hongtao
    Yang, Yong
    Xu, Ronghai
    Xin, Sensen
    Li, Moucheng
    JOURNAL OF SOLID STATE ELECTROCHEMISTRY, 2019, 23 (10) : 2793 - 2801
  • [39] Effect of Solution Temperature on Microstructure of 2205 Duplex Stainless Steel Welded Joints
    Qiao, Yuanyuan
    Zou, Dening
    Li, Jiao
    Han, Ying
    ECO-MATERIALS PROCESSING AND DESIGN XI, 2010, 658 : 432 - 435
  • [40] Effect of Temperature on Resistance to Pitting Corrosion in Duplex Stainless Steel 2205 Welds
    Y. Martinez-Galvan
    L. Dzib-Perez
    M. Garcia-Renteria
    O. Bilyy
    V. Lopez-Morelos
    J. Gonzalez-Sanchez
    Materials Science, 2023, 58 (6) : 755 - 761