Effect of Hot Working on Secondary Phase Formation in 2205 Duplex Stainless Steel

被引:0
|
作者
A.Momeni [1 ]
K.Dehghani [1 ]
机构
[1] Department of Mining and Metallurgy,Amir Kabir University of Technology
关键词
Duplex stainless steel; Aging; Hot working; σ; phase;
D O I
暂无
中图分类号
TG161 [钢的热处理];
学科分类号
080201 ; 080503 ;
摘要
In this research,aging treatments at temperatures of 800 and 900°C for different aging time of 5-60 min were conducted on solution treated as well as hot worked samples of 2205 dual phase stainless steel.The effect of aging treatment on precipitation of intermetallic phases was investigated in undeformed specimens and those subjected to hot deformation with different strain rates of 0.001-1 s-1.It was found that σ precipitation increased by hot working.It was also concluded that the volume fraction of phase increased with deformation temperature and decreased with strain rate.The precipitation of intermetallic phases(i.e.σ and χ) was analyzed by an Avrami-type kinetics equation of %(σ+χ)=A(1-exp(-ktn)) and the values of n and ln k were estimated for different thermomechanical regimes.The values of n were assessed to increase from 0.4 to 1 with strain rate in the studied range.Otherwise,It was also understood that ln k decreased with strain rate.Microstructural observations by means of optical microscopy and scanning electron microscopy showed that σ particles mostly nucleated at the ferrite-austenite interfaces.But no sign of χ-phase could be seen.This fortified the idea of certain literature that χ-phase always forms at early stages of aging and consumes through the precipitation of σ.
引用
收藏
页码:851 / 857
页数:7
相关论文
共 50 条
  • [1] Effect of Hot Working on Secondary Phase Formation in 2205 Duplex Stainless Steel
    Momeni, A.
    Dehghani, K.
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2010, 26 (09) : 851 - 857
  • [2] HOT DEFORMATION BEHAVIOR OF 2205 DUPLEX STAINLESS STEEL
    Chen Lei
    Wang Longmei
    Du Xiaojian
    Liu Xiao
    ACTA METALLURGICA SINICA, 2010, 46 (01) : 52 - 56
  • [3] Effect of cold working and isothermal aging on the precipitation of sigma phase in 2205 duplex stainless steel
    Cho, Noon-Sung
    Lee, Kwangmin
    MATERIALS CHARACTERIZATION, 2013, 75 : 29 - 34
  • [4] Analysis of χ phase precipitation in aged 2205 duplex stainless steel
    Heping Liu
    Hu’er Sun
    Bin Liu
    Dazhao Li
    Fenger Sun
    Yongtao Zhang
    Journal of Wuhan University of Technology-Mater. Sci. Ed., 2015, 30 : 591 - 595
  • [5] Analysis of χ Phase Precipitation in Aged 2205 Duplex Stainless Steel
    刘和平
    SUN Hu'er
    LIU Bin
    LI Dazhao
    SUN Fenger
    ZHANG Yongtao
    Journal of Wuhan University of Technology(Materials Science), 2015, (03) : 591 - 595
  • [6] HOT TENSILE TESTING OF SAF 2205 DUPLEX STAINLESS STEEL
    Tehovnik, Franc
    Zuzek, Borut
    Burja, Jaka
    MATERIALI IN TEHNOLOGIJE, 2016, 50 (06): : 989 - 993
  • [7] Sigma phase precipitation in duplex stainless steel 2205
    Sieurin, Henrik
    Sandstrom, Rolf
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 444 (1-2): : 271 - 276
  • [8] Thermal aging effect on 2205 duplex stainless steel
    WANG Zhiyu
    CHEN Xu
    BaosteelTechnicalResearch, 2017, 11 (03) : 24 - 29
  • [9] Analysis of χ Phase Precipitation in Aged 2205 Duplex Stainless Steel
    Liu Heping
    Sun Hu'er
    Liu Bin
    Li Dazhao
    Sun Fenger
    Zhang Yongtao
    JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION, 2015, 30 (03): : 591 - 595
  • [10] Effect of Aging Temperature and Time on Secondary Phase Precipitation and Texture in an Ultrafine Grained 2205 Duplex Stainless Steel after Cold Rolling
    Wolf, Witor
    de Paula Inacio, Loren Kelly
    Santos, Dagoberto Brandao
    MATERIALS PERFORMANCE AND CHARACTERIZATION, 2021, 10 (01) : 297 - 316