Non-pneumatic mechanical elastic wheel natural dynamic characteristics and influencing factors

被引:0
|
作者
赵又群 [1 ]
臧利国 [1 ]
陈月乔 [1 ]
李波 [1 ]
王健 [1 ]
机构
[1] College of Energy and Power Engineering, Nanjing University of Aeronautics and Astronautics
基金
中国国家自然科学基金;
关键词
vehicles; finite element method; mechanical elastic wheel(MEW); run-flat tire; natural characteristic; modal analysis;
D O I
暂无
中图分类号
O343 [弹性力学];
学科分类号
摘要
Non-pneumatic tire appears to have advantages over traditional pneumatic tire in terms of flat proof and maintenance free.A mechanical elastic wheel(MEW) with a non-pneumatic elastic outer ring which functions as air of pneumatic tire was presented.The structure of MEW was non-inflatable integrated configuration and the effect of hinges was accounted for only in tension. To establish finite element model of MEW, various nonlinear factors, such as geometrical nonlinearity, material nonlinearity and contact nonlinearity, were considered. Load characteristic test was conducted by tyre dynamic test-bed to obtain force-deflection curve. And the finite element model was validated through load characteristic test. Natural dynamic characteristics of the MEW and its influencing factors were investigated based on the finite element model. Simulation results show that the finite element model closely matched experimental wheel. The results also show that natural frequency is related to ground constraints, material properties, loads and torques. Influencing factors as above obviously affect the amplitude of mode of vibration, but have little effect on mode of vibration shape. The results can provide guidance for experiment research, structural optimization of MEW.
引用
收藏
页码:1707 / 1715
页数:9
相关论文
共 50 条
  • [41] Force and Moment Characteristics of a Rhombi Tessellated Non-Pneumatic Tire
    Kumar, Anand Suresh
    Kumar, Ramarathnam Krishna
    TIRE SCIENCE AND TECHNOLOGY, 2016, 44 (02) : 130 - 148
  • [42] Dynamic Finite Element Analysis of Rolling Non-Pneumatic Tire
    Rugsaj, Ravivat
    Suvanjumrat, Chakrit
    INTERNATIONAL JOURNAL OF AUTOMOTIVE TECHNOLOGY, 2021, 22 (04) : 1011 - 1022
  • [43] The multi-objective optimization of a non-pneumatic wheel based on its life prediction
    Xiao, Zhen
    Zhao, Youqun
    Lin, Fen
    Zhu, Mingmin
    Deng, Yaoji
    Zang, Liguo
    ENGINEERING COMPUTATIONS, 2019, 36 (03) : 997 - 1020
  • [44] THE DYNAMIC PROPERTIES OF A NON-PNEUMATIC TIRE WITH FLEXIBLE AUXETIC HONEYCOMB SPOKES
    Lee, Chihun
    Ju, Jaehyung
    Kim, Doo-Man
    INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION - 2012, VOL 8, 2012, : 605 - 615
  • [45] Thermal Mechanical Coupling Analysis of a Flexible Spoke Non-pneumatic Tire
    Fu, Hongxun
    Liang, Xuemeng
    Wang, Yan
    Ku, Laiyun
    Xiao, Zhen
    STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING, 2022, 68 (03): : 143 - 154
  • [46] Mechanical properties analysis of non-pneumatic tire with gradient honeycomb structure
    Liu, Tao
    Deng, Yaoji
    Lu, Keyu
    Shen, Hui
    Gong, Junjie
    Li, Hong
    ENGINEERING SCIENCE AND TECHNOLOGY-AN INTERNATIONAL JOURNAL-JESTECH, 2024, 59
  • [47] Investigation on the static and dynamic behaviors of non-pneumatic tires with honeycomb spokes
    Jin, Xiaochao
    Hou, Cheng
    Fan, Xueling
    Sun, Yongle
    Lv, Jinan
    Lu, Chunsheng
    COMPOSITE STRUCTURES, 2018, 187 : 27 - 35
  • [48] The Influence of the Honeycomb Design Parameters on the Mechanical Behavior of Non-Pneumatic Tires
    Ganniari-Papageorgiou, Evangelia
    Chatzistergos, Panagiotis
    Wang, Xiaoxu
    INTERNATIONAL JOURNAL OF APPLIED MECHANICS, 2020, 12 (03)
  • [49] ON THE EFFECTS OF EDGE SCALLOPING FOR COLLAPSIBLE SPOKES IN A NON-PNEUMATIC WHEEL DURING HIGH SPEED ROLLING
    Ramachandran, Maya
    Bezgam, Shashank
    Thompson, Lonny L.
    Ziegert, John C.
    Rhyne, Timothy B.
    Cron, Steven M.
    IMECE2009: PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, VOL 13, 2010, : 685 - 697
  • [50] META-MATERIAL DESIGN OF THE SHEAR LAYER OF A NON-PNEUMATIC WHEEL USING TOPOLOGY OPTIMIZATION
    Czech, Christopher
    Guarneri, Paolo
    Fadel, Georges
    PROCEEDINGS OF THE ASME INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE 2012, VOL 3, PTS A AND B, 2012, : 893 - 903