Design Schemes and Comparison Research of the End-effector of Large Space Manipulator

被引:0
|
作者
FENG Fei*
机构
关键词
end-effector; large space manipulator; docking mechanism; soft capture; misalignment tolerance; passive compliance; active compliance;
D O I
暂无
中图分类号
TP242 [机器人];
学科分类号
1111 ;
摘要
The end-effector of the large space manipulator is employed to assist the manipulator in handling and manipulating large payloads on orbit.Currently,there are few researches about the end-effector,and the existing end-effectors have some disadvantages,such as poor misalignment tolerance capability and complex mechanical components.According to the end positioning errors and the residual vibration characters of the large space manipulators,two basic performance requirements of the end-effector which include the capabilities of misalignment tolerance and soft capture are proposed.And the end-effector should accommodate the following misalignments of the mechanical interface.The translation misalignments in axial and radial directions and the angular misalignments in roll,pitch and yaw are ±100 mm,100 mm,±10°,±15°,±15°,respectively.Seven end-effector schemes are presented and the capabilities of misalignment tolerance and soft capture are analyzed elementarily.The three fingers-three petals end-effector and the steel cable-snared end-effector are the most feasible schemes among the seven schemes,and they are designed in detail.The capabilities of misalignment tolerance and soft capture are validated and evaluated,through the experiment on the micro-gravity simulating device and the dynamic analysis in ADAMS software.The results show that the misalignment tolerance capabilities of these two schemes could satisfy the requirement.And the translation misalignment tolerances in axial and radial directions and the angular misalignment tolerances in roll,pitch and yaw of the steel cable-snared end-effector are 30mm,15mm,6°,3° and 3° larger than those of the three fingers-three petals end-effector,respectively.And the contact force of the steel cable-snared end-effector is smaller and smoother than that of the three fingers-three petals end-effector.The end-effector schemes and research methods are beneficial to the developments of the large space manipulator end-effctor and the space docking mechanism.
引用
收藏
页码:674 / 687
页数:14
相关论文
共 50 条
  • [41] Development of space end-effector with capabilities of misalignment tolerance and soft capture based on tendon-sheath transmission system
    Fei Feng
    Yi-wei Liu
    Hong Liu
    He-gao Cai
    Journal of Central South University, 2013, 20 : 3015 - 3030
  • [42] Design and Experiment of Adjustable Spacing End-effector Based on Cylindrical Cam
    Cui Y.
    Wei Y.
    Ding X.
    Cui G.
    He Z.
    Wang M.
    Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery, 2022, 53 (01): : 104 - 114and122
  • [43] Design and Experiment of Flexible Profiling Picking End-effector for Agaricus bisporus
    Ji J.
    Li M.
    Zhao K.
    Ma H.
    Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery, 2023, 54 (01): : 104 - 115
  • [44] Design and test of end-effector for automatic transplanting of strawberry plug seedlings
    Liu J.
    Li M.
    Li N.
    Li P.
    Zhao M.
    Yue W.
    1600, Chinese Society of Agricultural Machinery (47): : 49 - 58
  • [45] Design of a multifunctional end-effector for robotic replacement of TBM disc cutters
    Zhou, Jinshu
    Yang, Qiang
    Du, Liang
    Hu, Zhengtao
    Bao, Sheng
    Yuan, Jianjun
    Xie, Jintao
    Li, Meng
    Wang, Weidong
    2024 IEEE INTERNATIONAL CONFERENCE ON MECHATRONICS AND AUTOMATION, ICMA 2024, 2024, : 1 - 6
  • [46] Research on Grasping Planning for Apple Picking Robot's End-Effector
    Liu, Feiyu
    Ji, Wei
    Tang, Wei
    Xu, Bo
    Zhao, Dean
    PROCEEDINGS OF THE 2015 CHINESE INTELLIGENT SYSTEMS CONFERENCE, VOL 1, 2016, 359 : 95 - 103
  • [47] Design of Modular End-effector for Collaborative Robot based on Underactuated Mechanism
    Park, Hyeonjun
    Kim, Donghan
    Lee, Bumjoo
    2020 FOURTH IEEE INTERNATIONAL CONFERENCE ON ROBOTIC COMPUTING (IRC 2020), 2020, : 475 - 479
  • [48] Design of the end-effector for plug seedlings transplanter and analysis on virtual prototype
    Sun G.
    Wang X.
    He G.
    Zhou T.
    Wang C.
    Qiao X.
    Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery, 2010, 41 (10): : 48 - 53+47
  • [49] Design and Validation of a Reconfigurable Robotic End-Effector Based on Shape Memory Alloys
    Motzki, Paul
    Khelfa, Frank
    Zimmer, Lukas
    Schmidt, Marvin
    Seelecke, Stefan
    IEEE-ASME TRANSACTIONS ON MECHATRONICS, 2019, 24 (01) : 293 - 303
  • [50] Design and Analysis of a Pneumatic End-Effector with an Air Contraction Clamp for Soft Robotics
    Vasquez Rapalo, Andres Orlando
    Bardales Cortes, Claudio Alfonso
    Luis Ordonez Avila, Jose
    2024 9TH INTERNATIONAL CONFERENCE ON CONTROL AND ROBOTICS ENGINEERING, ICCRE 2024, 2024, : 98 - 103