Design Schemes and Comparison Research of the End-effector of Large Space Manipulator

被引:0
|
作者
FENG Fei*
机构
关键词
end-effector; large space manipulator; docking mechanism; soft capture; misalignment tolerance; passive compliance; active compliance;
D O I
暂无
中图分类号
TP242 [机器人];
学科分类号
1111 ;
摘要
The end-effector of the large space manipulator is employed to assist the manipulator in handling and manipulating large payloads on orbit.Currently,there are few researches about the end-effector,and the existing end-effectors have some disadvantages,such as poor misalignment tolerance capability and complex mechanical components.According to the end positioning errors and the residual vibration characters of the large space manipulators,two basic performance requirements of the end-effector which include the capabilities of misalignment tolerance and soft capture are proposed.And the end-effector should accommodate the following misalignments of the mechanical interface.The translation misalignments in axial and radial directions and the angular misalignments in roll,pitch and yaw are ±100 mm,100 mm,±10°,±15°,±15°,respectively.Seven end-effector schemes are presented and the capabilities of misalignment tolerance and soft capture are analyzed elementarily.The three fingers-three petals end-effector and the steel cable-snared end-effector are the most feasible schemes among the seven schemes,and they are designed in detail.The capabilities of misalignment tolerance and soft capture are validated and evaluated,through the experiment on the micro-gravity simulating device and the dynamic analysis in ADAMS software.The results show that the misalignment tolerance capabilities of these two schemes could satisfy the requirement.And the translation misalignment tolerances in axial and radial directions and the angular misalignment tolerances in roll,pitch and yaw of the steel cable-snared end-effector are 30mm,15mm,6°,3° and 3° larger than those of the three fingers-three petals end-effector,respectively.And the contact force of the steel cable-snared end-effector is smaller and smoother than that of the three fingers-three petals end-effector.The end-effector schemes and research methods are beneficial to the developments of the large space manipulator end-effctor and the space docking mechanism.
引用
收藏
页码:674 / 687
页数:14
相关论文
共 50 条
  • [21] An Underactuated End-effector Design for Fruit Picking
    Song, Xin
    Shan, Huiyong
    Liu, Hua
    Guo, Junwang
    PROCEEDINGS OF 2016 23RD INTERNATIONAL CONFERENCE ON MECHATRONICS AND MACHINE VISION IN PRACTICE (M2VIP), 2016, : 15 - 19
  • [22] Design and Verification of End-effector and Adaptation Interfaces for On-orbit Construction of Space Robot
    Zhao L.
    Liu Z.
    Zhao J.
    Duan Q.
    Wang Z.
    Liu H.
    Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2024, 60 (03): : 1 - 10
  • [23] A research on the mounted configuration of end-effector for robotic drilling
    Liang, Jie
    ROBOTICA, 2015, 33 (10) : 2156 - 2165
  • [24] Design of a flexible end-effector based on characteristics of tomatoes
    Zhou, Kehong
    Xia, Liru
    Liu, Jun
    Qian, Mingyan
    Pi, Jie
    INTERNATIONAL JOURNAL OF AGRICULTURAL AND BIOLOGICAL ENGINEERING, 2022, 15 (02) : 13 - 24
  • [25] Design and Experiment of Adjustable End-effector of Cabbage Seedlings
    Han B.
    Shen D.
    Guo C.
    Liu Q.
    Wang X.
    Song C.
    Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery, 2019, 50 (11): : 111 - 120
  • [26] A Review of End-Effector Research Based on Compliance Control
    Dai, Ye
    Xiang, Chaofang
    Qu, Wenyin
    Zhang, Qihao
    MACHINES, 2022, 10 (02)
  • [27] The Optimal Design and Simulation of End-effector of Working Robot
    Chen, Yan
    Jiang, Zhi-Lin
    Li, Jia-Wei
    Zou, Xiang-Jun
    Wang, Jia-Sheng
    2016 INTERNATIONAL CONFERENCE ON MECHANICS DESIGN, MANUFACTURING AND AUTOMATION (MDM 2016), 2016, : 296 - 303
  • [28] Design of a Flexible End-Effector for Logistics Sorting Robot
    Liang, Yi
    Li, Aojie
    Chen, Diansheng
    Xu, Ying
    Wang, Min
    2020 IEEE INTERNATIONAL CONFERENCE ON REAL-TIME COMPUTING AND ROBOTICS (IEEE-RCAR 2020), 2020, : 481 - 486
  • [29] Design and Experiment of Underactuated End-effector for Citrus Picking
    Wei B.
    He J.
    Shi Y.
    Jiang G.
    Zhang X.
    Ma Y.
    Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery, 2021, 52 (10): : 120 - 128
  • [30] Design and experimental study of the end-effector for broccoli harvesting
    Zhao, Xiong
    Xu, Gangji
    Zhang, Pengfei
    Yu, Gaohong
    Xu, Yadan
    INTERNATIONAL JOURNAL OF AGRICULTURAL AND BIOLOGICAL ENGINEERING, 2024, 17 (01) : 137 - 144