C-Mn segregation and its effect on phase transformation and deformation in Fe-Mn-C alloys

被引：0
作者：
朱瑞富
吕宇鹏
魏涛
机构：
[1] CollegeofMaterialScienceandEngineering,ShandongUniversityofTechnology,Jinan,China,CollegeofMaterialScienceandEngineering,ShandongUniversityofTechnology,Jinan,China,CollegeofMaterialScienceandEngineering,ShandongUniversityofTechnology,Jinan,China
来源：
Science in China(Series E:Technological Sciences) | 1997年 / 06期
关键词：
Fe-Mn-C alloy; C-Mn segregation; phase transformation; deformation; valence electron structure;
D O I：
暂无
中图分类号：
TG113 [金相学（金属的组织与性能）];
学科分类号：
080502 ;
摘要：
<正> C-Mn segregation and its effect on phase transformation and plastic deformation in Fe-Mn-C alloys were studied through the calculation of valence electron structure, the microregion composition detection and TEM in-situ dynamic tensile deformation test The experimental results show that in Fe-8Mn-1.2C alloyed austenite, nA of units with C Mn involved is 3 98 times that of units without C involved and 1.4 times that of units with C involved; aCD of units with C-Mn involved is 2 21 times that of units with C involved. In Fe-Mn-C alloyed austenites, there exists microsegrcgation of C-Mn, forming the randomly distributed Fe-Mn-C atomic cluster segregation zone linked with the -C-Mn-C-Mn- strong bond network, which will effectively slow down the motion of atoms and retard the initiation of the slip system and the movement of dislocation, and thus will severely influence the phase transformation and deformation of the alloy
引用
收藏
页码：567 / 573
页数：7
相关论文
共 50 条
[31]   Premature Fracture Mechanism in an Fe-Mn-C Austenitic Steel [J].
Koyama, Motomichi ;
Sawaguchi, Takahiro ;
Tsuzaki, Kaneaki .
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2012, 43A (11) :4063-4074
[32]   Numerical simulation for α/γ iransformation in Fe-Mn-C system by phase-field model [J].
Yoon, JK ;
Yeon, DH ;
Cha, PR .
PRICM 4: FORTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, VOLS I AND II, 2001, :2443-2446
[33]   The Phase Composition and the Mechanical Properties of WC-(Fe-Mn-C) Cemented Steels [J].
Sevostyanova, Irina N. ;
Sablina, Tatyana Yu ;
Kulkov, Sergey N. .
PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON PHYSICAL MESOMECHANICS. MATERIALS WITH MULTILEVEL HIERARCHICAL STRUCTURE AND INTELLIGENT MANUFACTURING TECHNOLOGY, 2020, 2310
[34]   Orientation dependence of deformation and failure in a C-Mn weld metal [J].
Zhang, Chengze ;
Gong, Baoming ;
Deng, Caiyan ;
Wang, Dongpo .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2017, 250 :363-371
[35]   Analysis of transformation stasis during the isothermal bainitic ferrite formation in Fe-C-Mn and Fe-C-Mn-Si alloys [J].
Chen, Hao ;
Zhu, Kangying ;
Zhao, Lie ;
van der Zwaag, Sybrand .
ACTA MATERIALIA, 2013, 61 (14) :5458-5468
[36]   Direct observation of the twinning mechanism in an austenitic Fe-Mn-C steel [J].
Bracke, L. ;
Kestens, L. ;
Penning, J. .
SCRIPTA MATERIALIA, 2009, 61 (02) :220-222
[37]   Microstructure and texture evolution during recrystallization of a Fe-Mn-C alloy [J].
Lu, Fayun ;
Haase, Christian ;
Barrales-Mora, Luis A. ;
Molodov, Dmitri A. ;
Yang, Ping .
RECRYSTALLIZATION AND GRAIN GROWTH V, 2013, 753 :177-+
[38]   Solidification Microstructure, Segregation, and Shrinkage of Fe-Mn-C Twinning-Induced Plasticity Steel by Simulation and Experiment [J].
Lan, Peng ;
Tang, Haiyan ;
Zhang, Jiaquan .
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2016, 47A (06) :2964-2984
[39]   Validation of a Model of Plastic Deformation of C-Mn Steels in the Two-Phase Temperature Region [J].
Pietrzyk, M. ;
Kuziak, R. .
STEEL RESEARCH INTERNATIONAL, 2009, 80 (10) :767-778
[40]   Recrystallization behavior, microstructure evolution and mechanical properties of biodegradable Fe-Mn-C(-Pd) TWIP alloys [J].
Schinhammer, Michael ;
Pecnik, Christina M. ;
Rechberger, Felix ;
Haenzi, Anja C. ;
Loeffler, Joerg F. ;
Uggowitzer, Peter J. .
ACTA MATERIALIA, 2012, 60 (6-7) :2746-2756
12345