Nucleation mechanisms of dynamic recrystallization for G3 alloy during hot compression

被引：0

作者：

Jue Wang ^{[1
,2
]}

JianXin Dong ^{[3
]}

MaiCang Zhang ^{[3
]}

机构：

[1] Jiangsu Key Laboratory of Advanced Structural Materials and Application Technology

[2] School of Materials Science and Engineering,Nanjing Institute of Technology

[3] School of Materials Science and Engineering,University of Science and Technology Beijing

来源：

Rare Metals | 2016年 / 35卷 / 07期

关键词：

G3; alloy; Dynamic recrystallization; Nucleation mechanism; Annealing twins;

D O I：

暂无

中图分类号：

TG133.4 [];

学科分类号：

080502 ;

摘要：

Dynamic recrystallization（DRX） mechanisms of a nickel-based corrosion-resistant alloy, G3, were investigated by hot compression tests with temperatures from 1050 to 1200 ℃ and strain rates from 0.1 to 5.0 s-1.Deformation microstructure was observed at the strain from 0.05 to 0.75 by electron backscatter diffraction（EBSD） and transmission electron microscope（TEM）.Work hardening rate curves were calculated to analyze the effect of deformation parameters on the nucleation process.Results indicate that strain-induced grain boundary migration is the principal mechanism of DRX. Large annealing twins promote nucleation by accumulating dislocations and fragmenting into cell blocks. Continuous dynamic recrystallization is also detected to be an effective supplement mechanism, especially at low temperature and high strain rate.

引用

页码：543 / 550

页数：8

共 24 条

[1]

Hot workability characteristics of Rene88DT superalloy with directionally solidified microstructure[J]. Fu-Lin Li,Rui Fu,Di Feng,Zhi-Ling Tian.Rare Metals. 2015(01)

[2] 690合金高温变形行为与动态再结晶模型 [J].

杨亮 ;

董建新 ;

张麦仓 .

稀有金属材料与工程, 2012, 41 (04) :727-732

[3] Hastelloy G-3合金热变形特性研究 [J].

罗坤杰 ;

张麦仓 ;

王宝顺 ;

董建新 .

稀有金属材料与工程, 2011, 40 (04) :605-609

[4]

Hot deformation characteristics of Alloy 617B nickel-based superalloy: A study using processing map[J] . He Jiang,Jianxin Dong,Maicang Zhang,Lei Zheng,Zhihao Yao.Journal of Alloys and Compounds . 2015

[5]

Hot deformation characteristics and processing map analysis for Nickel-based corrosion resistant alloy[J] . L. Wang,F. Liu,J.J. Cheng,Q. Zuo,C.F. Chen.Journal of Alloys and Compounds . 2014

[6]

Hot working characteristics of nickel-base superalloy 740H during compression[J] . Jue Wang,Jianxin Dong,Maicang Zhang,Xishan Xie.Materials Science ＆ Engineering A . 2013

[7] On the characteristics of substructure development through dynamic recrystallization [J].

Beladi, Hossein ;

Cizek, Pavel ;

Hodgson, Peter D. .

ACTA MATERIALIA, 2010, 58 (09) :3531-3541

[8] The Avrami kinetics of dynamic recrystallization [J].

Jonas, John J. ;

Quelennec, Xavier ;

Jiang, Lan ;

Martin, Etienne .

ACTA MATERIALIA, 2009, 57 (09) :2748-2756

[9]

Dynamic Recrystallization of Austenite in Ni-30 Pct Fe Model Alloy: Microstructure and Texture Evolution[J] . Hossein Beladi,Pavel Cizek,Peter D. Hodgson.Metallurgical and Materials Transactions A . 2009 (5)

[10]

Correlation between Zener–Hollomon parameter and necklace DRX during hot deformation of 316 stainless steel[J] . Meysam Jafari,Abbas Najafizadeh.Materials Science ＆ Engineering A . 2008 (1)

← 1 2 3 →