Effect of Aluminium and Silicon on High Temperature Oxidation Resistance of Fe-Cr-Ni Heat Resistant Steel

被引：0

作者：

王海涛 ^{[1
]}

赵奇 ^{[1
,2
]}

于化顺 ^{[1
]}

张振亚 ^{[1
]}

崔红卫 ^{[1
]}

闵光辉 ^{[1
]}

机构：

[1] Key Laboratory of Liquid Structure and Heredity of Materials of Ministry of Education, School of Materials Science and Engineering, Shandong University

[2] School of Materials Engineering, Yantai Nanshan University

来源：

Transactions of Tianjin University | 2009年 / 06期

关键词：

heat resistant steel; oxide scale; oxidation resistance;

D O I：

暂无

中图分类号：

TG142.15 [];

学科分类号：

080502 ;

摘要：

Fe-Cr-Ni heat resistant steels with different contents of Al and Si were cast in intermediate fre-quency induction furnace with non-oxidation method. With oxidation weight gain method, the oxidation resis-tance of test alloys was examined at 1 200 ℃ for 500 h. The effects of Al and Si on oxidation resistance were studied through analyses of X-ray diffraction (XRD) and scanning electron microscope (SEM). It is shown that the composition of oxide scales is a decisive factor for the oxidation resistance of heat resistant steels. The com-pounded scale composed of Cr2O3, α-Al2O3, SiO2 and Fe(Ni)Cr2O4, with flat and compact structure, fine and even grains, exhibits complete oxidation resistance at 1 200 ℃. Its oxidation weight gain rate is only 0.081 g/(m2-h). By the criterion of standard Gibbs formation free energy, a model of nucleation and growth of the compounded scale was established. The formation of the compounded scale was the result of the competition of being oxidated and reduction among Al, Si, and the matrix metal elements of Fe, Cr and Ni. The protection of the compounded scale was analyzed from the perspectives of electrical conductivity and strength properties.

引用

页码：457 / 462

页数：6

共 8 条

[1] Erosion–oxidation behaviour of pack-aluminized 9% chromium steel under fluidized-bed conditions at elevated temperature[J] . E. Huttunen-Saarivirta,F.H. Stott,V. Rohr,M. Schütze.Corrosion Science . 2007 (7)
[2] Thermal oxidation kinetics and oxide scale adhesion of Fe–15Cr alloys as a function of their silicon content[J] . G. Bamba,Y. Wouters,A. Galerie,F. Charlot,A. Dellali.Acta Materialia . 2006 (15)
[3] Evaluation of oxidation and hydrogen permeation in Al-containing stainless steel alloys[J] . Thad M. Adams,Paul Korinko,Andrew Duncan.Materials Science ＆ Engineering A . 2006 (1)
[4] Influence of silicon addition on the oxidation resistance of CrN coatings[J] . A. Thobor-Keck,F. Lapostolle,A.S. Dehlinger,D. Pilloud,J.F. Pierson,C. Coddet.Surface ＆ Coatings Technology . 2005 (1)
[5] Effect of silicon on the oxidation resistance of 9% Cr steels[J] . A.M Huntz,V Bague,G Beauplé,C Haut,C Sévérac,P Lecour,X Longaygue,F Ropital.Applied Surface Science . 2003 (1)
[6] High temperature corrosion behavior of siliconized 310 stainless steel
Hsu, HW
Tsai, WT
[J]. MATERIALS CHEMISTRY AND PHYSICS, 2000, 64 (02) : 147 - 155
[7] Oxidation and corrosion behaviour of Fe–Cr and Fe–Cr–Al alloys with minor alloying additions[J] . I.M Wolff,L.E Iorio,T Rumpf,P.V.T Scheers,J.H Potgieter.Materials Science ＆ Engineering A . 1998 (1)
[8] Effect of aluminizing on surface microstructure of an HH309 stainless steel. S. Sharafi and M.R. Farhang. Surface and Coatings Technology . 2006

← 1 →