Analysis of the Microstructure and Permeability of the Laminates with Different Fiber Volume Fraction

被引:0
作者
马悦 [1 ]
李炜 [1 ]
梁子青 [2 ]
机构
[1] College of Textiles,Donghua University
[2] National Key Lab of Advanced Composites,Institute of Aeronautical Materials
关键词
microstructure; fiber volume fraction; permeability; capillary pressure; void;
D O I
10.19884/j.1672-5220.2008.03.008
中图分类号
TQ340.1 [基础理论];
学科分类号
0805 ; 080502 ;
摘要
Microstructures of laminates produced by epoxy/carbon fibers with different fiber volume fraction were studied by analyzing the composite cross-sections.The main result of the compaction of reinforcement is the flatting of bundle shape,the reducing of gap and the embedment of bundles among each layer.The void content outside the bundle decreased sharply during the compaction until it is less than that inside the bundle when the fiber volume fraction is over 60%.The resin flow velocity in the fiber tow is 102-104 times greater than the flow velocity out the fiber tow no matter the capillary pressure is taken into account or not.
引用
收藏
页码:282 / 285
页数:4
相关论文
共 2 条
[1]   Compression and microstructure of fibre plain woven cloths in the processing of polymer composites [J].
Saunders, RA ;
Lekakou, C ;
Bader, MG .
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 1998, 29 (04) :443-454
[2]  
Permeability modeling of fibrous media in composite processing .2 Choi Mi Ae,Lee Mi Hye,Chang Jaeeon,et al. Journal of Non-Newtonian Fluid Mech . 1998