基于商用坐标测量机的3D微纳米计量(英文)

被引：3
作者：
于连栋 [1 ]
BRAND Uwe [2 ]
机构：
[1] 合肥工业大学仪器科学与光电工程学院
[2] 德国联邦物理技术研究院
来源：
纳米技术与精密工程 | 2008年 / 06期
关键词：
微系统计量; 坐标测量机; 激光干涉仪; 光纤探针;
D O I：
10.13494/j.npe.2008.087
中图分类号：
TH721 [坐标器和自动坐标器];
学科分类号：
摘要：
以测量精度为1μm的商用坐标测量机(CMM)为基础,构建了测量范围为25mm×40mm×25mm、测量不确定度约为0.15μm的PTB微纳米专用坐标测量机.研究了CMM的运动控制系统、恒温室的空调系统以及CMM的被动隔振系统等对测量结果的影响.由测量结果可以看出,CMM的运动控制系统产生的噪声水平约为其他误差源的2倍.通过FFT运算,发现未优化系统的短时最大漂移量发生频率为750Hz,对应为运动控制的工作频率.文中还介绍了测量力为1μN光纤探针的测量原理,并给出了对2.5mm短轴的测量结果.
引用
收藏
页码：437 / 441
页数：5
相关论文
共 12 条
  • [1] Vibrational probing technique for the nano-CMM based on optical radiation pres-sure control. Takaya Y,Imai K,Miyoshi T. Ann CIRP . 2004
  • [2] Development of aSpecial CMM for dimensional metrology on microsystem compo-nents. Brand U,Kleine-Besten T,Schwenke H. Proceedings of the Annual Meeting of the ASPE . 2000
  • [3] Development of a low costmicro-CMM for 3D micro/nano measurements. Fan K C,Fei Y T,Yu X F,et al. MeasurementScience and Technology . 2006
  • [4] Development of High Precision Mechanical Probes for Coordinate Measuring Machines. Pril W O. . 2002
  • [5] Microsystem metrology—The PTB special CMM. Yu L,Brand U,Muenchenhagen R,et al. Proc of International Symposium on Precision Mechanical Measurements . 2002
  • [6] Probing systems for dimensional micro-and nano-metrology. A.Weckenmann,G.Peggs,J.Hoff mann. Measurement Science and Technology . 2006
  • [7] Opto-tactile sensor for 2D and 3D measurement of small structures on coordinate measuring machines. Schwenke H,Waldele F,Weiskirch C,et al. Annals of the CIRP . 2001
  • [8] Fiber deflection probe for small hole metrology. Muralikrishnan B,Stone J A,Stoup J R. Precision Engineering . 2006
  • [9] Development and characterization of new probes for dimensional metrology on microsystem components. Kleine-Besten T,Loheide S,Brand U,et al. Proc EUS-PEN . 1999
  • [10] Beginning of opera-tion and optimization of a 3D micro measuring device. Brand U,Yu L,Chang C,et al. Proc of the3rd EUSPEN International Confer-ence . 2002
12