Heat Treatment of Cold-Rolled Low-Carbon Si-Mn Dual Phase Steels

The effects of overageing (OA) and vanadium addition on microstructure and properties of cold-rolled low-carbon Si-Mn dual phase (DP) steel sheets are studied.The results show that the microstructure and mechanical properties of DP steels are greatly affected by OA temperature.When OA is done at low temperatures (473-573K),the elongation rate increases sharply while both the yield strength and tensile strength decrease significantly.When OA is done at high temperatures (>573 K),the elongation does not further increase,but the yield strength increases and tensile strength decreases,which deteriorates the mechanical properties of the steel.The results also show that both the strength and the tempering stability can be significantly improved by vanadium microalloying.Finally,the optimum OA temperature for the traditional steel appears to be around 523K,while it is around 573K for the V-containing steel,resulting in the best overall mechanical properties.