Effect of deep cryogenic treatment on the properties of 80CrMo12 5 tool steel

被引：1

作者：

Kamran Amini ^{[1
]}

Said Nategh ^{[2
]}

Ali Shafyei ^{[3
]}

Ahmad Rezaeian ^{[3
]}

机构：

[1] Department of Materials Engineering Majlesi Branch Islamic Azad University

[2] Department of Materials Engineering Science and Research Branch Islamic Azad University

[3] Department of Materials Engineering Isfahan University of Technology

来源：

International Journal of Minerals Metallurgy and Materials | 2012年 / 19卷 / 01期

关键词：

tool steel; cryogenic treatment; stabilization; wear resistance; tensile strength; hardness; carbides;

D O I：

暂无

中图分类号：

TG142.45 [工具钢];

学科分类号：

080502 ;

摘要：

The effect of deep cryogenic treatment on the mechanical properties of 80CrMo12 5 tool steel was investigated. Moreover, the effects of stabilization (holding at room temperature for some periods before deep cryogenic treatment) and tempering before deep cryogenic treatment were studied. The results show that deep cryogenic treatment can eliminate the retained austenite, making a better carbide distribution and a higher carbide amount. As a result, a remarkable improvement in wear resistance of cryogenically treated specimens is observed. Moreover, the ultimate tensile strength increases, and the toughness of the sample decreases. It is also found that both stabilization and tempering before deep cryogenic treatment decrease the wear resistance, hardness, and carbides homogeneity compared to the deep cryogenically treated samples. It is concluded that deep cryogenic treatment should be performed without any delay on samples after quenching to reach the highest wear resistance and hardness.

引用

页码：30 / 37

页数：8

共 12 条

[1] Effects of Austenizing Time on Wear Behavior of D6 Tool Steel After Deep Cryogenic Treatment[J]. A Akhbarizadeh,M A Golozar,A Shafeie,M Kholghy.Journal of Iron and Steel Research(International). 2009(06)
[2] Influence of different cryotreatments on tribological behavior of 80CrMo12 5 cold work tool steel
Amini, K.
Nategh, S.
Shafyei, A.
[J]. MATERIALS & DESIGN, 2010, 31 (10) : 4666 - 4675
[3] The Effect of Cryogenic Treatment on the Properties of AISI D2[J] . C. H. Surberg,P. F. Stratton,K. Lingenhole.Materials and Manufacturing Processes . 2009 (7-8)
[4] Effect of Deep-Cryogenic Treatment on High Speed Steel Properties[J] . Franjo Cajner,Vojteh Leskovsek,Darko Landek,Hrvoje Cajner.Materials and Manufacturing Processes . 2009 (7-8)
[5] Influence of temperature of sub-zero treatments on the wear behaviour of die steel[J] . D. Das,K.K. Ray,A.K. Dutta.Wear . 2009 (9)
[6] The effect of deep cold induced nano-carbides on the wear of case hardened components
Stratton, Paul
Graf, Michael
[J]. CRYOGENICS, 2009, 49 (07) : 346 - 349
[7] Deep Cryogenic Treatment Improves Wear Resistance of En 31 Steel[J] . A. Joseph Vimal,A. Bensely,D. Mohan Lal,K. Srinivasan.Materials and Manufacturing Processes . 2008 (4)
[8] Effect of low temperature tempering prior cryogenic treatment on carburized steels[J] . M. Preciado,P.M. Bravo,J.M. Alegre.Journal of Materials Processing Tech. . 2006 (1)
[9] Microstructure of cryogenic treated M2 tool steel[J] . J.Y Huang,Y.T Zhu,X.Z Liao,I.J Beyerlein,M.A Bourke,T.E Mitchell.Materials Science & Engineering A . 2003 (1)
[10] Wear of cryo-treated engineering polymers and composites[J] . J Indumathi,J Bijwe,A.K Ghosh,M Fahim,N Krishnaraj.Wear . 1999

← 1 2 →