Prediction and optimization of process parameter of friction stir welded AA5083-H111 aluminum alloy using response surface methodology

被引:1
作者
R.Palanivel [1 ]
P.Koshy Mathews [2 ]
机构
[1] Department of Mechanical Engineering,Kalaivani College of Technology,Coimbatore,India
[2] Research and Development,Department of Mechanical Engineering,Kalaivani College of Technology,Coimbatore,India
关键词
friction stir welding; design expert; design of experiments; analysis of variance(ANOVA); response surface methodology(RSM); optimization;
D O I
暂无
中图分类号
TG453.9 [];
学科分类号
080201 ; 080503 ;
摘要
A systematic approach was presented to develop the empirical model for predicting the ultimate tensile strength of AA5083-H111 aluminum alloy which is widely used in ship building industry by incorporating friction stir welding(FSW) process parameters such as tool rotational speed,welding speed,and axial force.FSW was carried out considering three-factor five-level central composite rotatable design with full replications technique.Response surface methodology(RSM) was applied to developing linear regression model for establishing the relationship between the FSW process parameters and ultimate tensile strength.Analysis of variance(ANOVA) technique was used to check the adequacy of the developed model.The FSW process parameters were also optimized using response surface methodology(RSM) to maximize the ultimate tensile strength.The joint welded at a tool rotational speed of 1 000 r/min,a welding speed of 69 mm/min and an axial force of 1.33 t exhibits higher tensile strength compared with other joints.
引用
收藏
页码:1 / 8
页数:8
相关论文
共 4 条
  • [1] Optimum condition by mechanical characteristic evaluation in friction stir welding for 5083-O Al alloy
    Min-Su HAN
    Seung-Jun LEE
    Jae-Cheul PARK
    Seok-Cheol KO
    Yong-Bin WOO
    Seong-Jong KIM
    [J]. Transactions of Nonferrous Metals Society of China, 2009, 19(S1) (S1) : 17 - 22
  • [2] Predictions of the optimized friction stir spot welding process parameters for joining AA2024 aluminum alloy using RSM[J] . R. Karthikeyan,V. Balasubramanian.The International Journal of Advanced Manufacturing Technology . 2010 (1)
  • [3] Influences of tool pin profile and axial force on the formation of friction stir processing zone in AA6061 aluminium alloy[J] . K. Elangovan,V. Balasubramanian,M. Valliappan.The International Journal of Advanced Manufacturing Technology . 2008 (3)
  • [4] Friction stir welding characteristics of different heat-treated-state 2219 aluminum alloy plates[J] . Yingchun Chen,Huijie Liu,Jicai Feng.Materials Science & Engineering A . 2006 (1)