Performance Improvements of a Subsonic Axial-Flow Compressor by Means of a Non-Axisymmetric Stator Hub End-Wall

This paper deals with the application of a non-axisymmetric hub end-wall on the stator of a single stage high subsonic axial-flow compressor. In order to obtain a state-of-the-art stator non-axisymmetric hub end-wall configuration fulfilling the requirements for higher efficiency and total pressure ratio, an automated multi-objective optimizer was used, in conjunction with 3D-RANS-flow simulations. For the purpose of quantifying the effect of the optimal stator non axis-symmetric hub contouring on the compressor performance and its effects on the subsonic axial-flow compressor stator end-wall flow field structure, the coupled flow of the compressor stage with the baseline, axisymmetric and the non-axisymmetric stator hub end-wall was simulated with a state-of-theart multi-block flow 3D CFD solver. Based on the CFD simulations, the optimal compressor hub end-wall configuration is expected to increase the peak efficiency by approximately 2.04 points and a slight increase of the total pressure ratio. Detailed analyses of the numerical flow visualization at the hub have uncovered the different hub flow topologies between the cases with axisymmetric and non-axisymmetric hub end-walls. It was found that that the primary performance enhancement afforded by the non-axisymmetric hub end-wall is a result of the end-wall flow structure modification. Compared to the smooth wall case, the non-axisymmetric hub end-wall can reduce the formation and development of in-passage secondary flow by aerodynamic loading redistribution.