Impact pressuring diffusion bonding of TA17 to 0Cr18Ni9Ti

被引：0
|
作者：
秦斌
盛光敏
周波
黄家伟
机构：
[1] College of Materials Science and Engineering Chongqing University
来源：
China Welding | 2008年 / 02期
基金：
中国国家自然科学基金;
关键词：
diffusion bonding; impact pressure; titanium alloy; stainless steel; intermetallics;
D O I：
暂无
中图分类号：
TG115.5 [机械性能（力学性能）试验];
学科分类号：
080502 ;
摘要：
Impact pressuring diffusion bonding tests were carried out to produce joint between TA17 titanium alloy and 0Cr18Ni9Ti stainless steel. The reaction products and microstructure near the bonding interface were analyzed. The diffusion of Fe, Cr, Ni and Ti in the bond was revealed by energy dispersive spectroscopy. A number of phases, such as β-Ti, Fe2Ti and σ phases were identified by X-ray diffraction. It was concluded that the bonded joint broke in the region somewhere between Fe-Ti intermetallics and β-Ti during tensile loading. The relationship between bonding parameters and tensile strength of the joint was also determined experimentally, and the optimum time of bonding was only 220 s with 293 MPa joint strength.
引用
收藏
页码：67 / 71
页数：5
相关论文
共 50 条
  • [31] Effect of Strain on Microstructure Evolution of 1Cr18Ni9Ti Stainless Steel During Adiabatic Shearing
    Yang, Y.
    Jiang, L. H.
    Luo, S. H.
    Hu, H. B.
    Tang, T. G.
    Zhang, Q. M.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2016, 25 (01) : 29 - 37
  • [32] Solidification microstructure and deformation of stainless steel 1Cr18Ni9Ti cast by electromagnetic centrifugal casting
    Lin, G
    Yang, YS
    Hua, FA
    Guo, DY
    Hu, ZQ
    ACTA METALLURGICA SINICA, 2003, 39 (12) : 1233 - 1237
  • [33] Pits with coloured halos formed on 1Cr18Ni9Ti stainless steel surface after ennoblement in seawater
    Wang, Wei
    Zhang, Xia
    Wang, Jia
    MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS, 2009, 29 (03): : 851 - 855
  • [34] Inhibitive effect of benzotriazole on the stress corrosion cracking of 18Cr-9Ni-Ti stainless steel in acidic chloride solution
    Niu, L
    Cao, CN
    Lin, HC
    Song, GL
    CORROSION SCIENCE, 1998, 40 (07) : 1109 - 1117
  • [35] Diffusion Bonding of 17-4 Precipitation Hardening Stainless Steel to Ti Alloy With and Without Ni Alloy Interlayer: Interface Microstructure and Mechanical Properties
    S. Kundu
    G. Anand
    S. Chatterjee
    Metallurgical and Materials Transactions A, 2013, 44 : 2196 - 2211
  • [36] Diffusion Bonding of 17-4 Precipitation Hardening Stainless Steel to Ti Alloy With and Without Ni Alloy Interlayer: Interface Microstructure and Mechanical Properties
    Kundu, S.
    Anand, G.
    Chatterjee, S.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2013, 44A (05): : 2196 - 2211
  • [37] Microstructural characterization in diffusion bonded TiC-Al2O3/Cr18-Ni8 joint with Ti interlayer
    Wang, J
    Li, YJ
    Yin, YS
    BULLETIN OF MATERIALS SCIENCE, 2006, 29 (02) : 155 - 158
  • [38] Microstructural characterization in diffusion bonded TiC-Al2O3/Cr18-Ni8 joint with Ti interlayer
    Wang Juan
    Li Yajiang
    Yin Yansheng
    Bulletin of Materials Science, 2006, 29 (2) : 155 - 158
  • [39] Diffusion bonding of (Hf0.2Zr0.2Ti0.2Ta0.2Nb0.2)C high-entropy ceramic with metallic Ni foil
    Mu, R. J.
    Yang, Z. W.
    Niu, S. Y.
    Sun, K. B.
    Wang, Y.
    Wang, D. P.
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2021, 41 (15) : 7478 - 7487
  • [40] Friction and wear behavior of plasma nitrided 1Cr18Ni9Ti austenitic stainless steel under lubrication condition
    Xia, YQ
    Hu, JH
    Zhou, F
    Lin, YM
    Qiao, YM
    Xu, T
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2005, 402 (1-2): : 135 - 141
12345