Optimization of safflower oil transesterification using the Taguchi approach

被引:0
作者
N.Kumar [1 ]
S.K.Mohapatra [1 ]
S.S.Ragit [1 ]
K.Kundu [2 ]
R.Karmakar [3 ]
机构
[1] Mechanical Engineering Department,Thapar University
关键词
ANOVA; Biodiesel; Optimization; Taguchi approach; Transesterification;
D O I
暂无
中图分类号
TE667 [从其他原料提取石油];
学科分类号
081702 ;
摘要
Biodiesel is an alternative renewable fuel which is produced by using biomass resources. Its physicochemical properties are close to those of the petroleum diesel fuel. This study highlights biodiesel production from safflower seed oil. The main aim of this experimental work is to optimize the process parameters, namely the methanolto-oil molar ratio, catalyst concentration, reaction time and reaction temperature for biodiesel production. The Taguchi robust design approach was used with an L9 orthogonal array to analyze the influence of process factors on performance parameters. The results showed that the optimum yield of biodiesel was 93.8% with viscosity 5.60 c St, with a methanol-to-oil molar ratio of 4:1, catalyst concentration of 1.5 wt%, reaction time of 90 min and reaction temperature of 60 ℃. The catalyst concentration was found to be the most influencing parameter which contributed 51.1% and 50.8% of the total effect on the yield of biodiesel, Y;, and viscosity of biodiesel, Y;, respectively.
引用
收藏
页码:798 / 805
页数:8
相关论文
共 50 条
[31]   Optimization of mesoporous K/SBA-15 catalyzed transesterification of palm oil using response surface methodology [J].
Abdullah, Ahmad Zuhairi ;
Razali, Noraini ;
Lee, Keat Teong .
FUEL PROCESSING TECHNOLOGY, 2009, 90 (7-8) :958-964
[32]   Biodiesel Production via Transesterification from Safflower (Carthamus tinctorius L.) Seed Oil [J].
Hamamci, C. ;
Saydut, A. ;
Tonbul, Y. ;
Kaya, C. ;
Kafadar, A. B. .
ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS, 2011, 33 (06) :512-520
[33]   Immobilized lipase-catalyzed transesterification of Jatropha curcas oil: Optimization and modeling [J].
Zarei, Alireza ;
Amin, Nor Aishah Saidina ;
Talebian-Kiakalaieh, Amin ;
Zain, Nor Azimah Mohd .
JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS, 2014, 45 (02) :444-451
[34]   Transesterification optimization using calcium oxide from Karanja oil and results validation by ANN [J].
Patil, Satish A. ;
Arakerimath, Racyya. R. .
JOURNAL OF ENGINEERING RESEARCH, 2022, 10 (2A) :39-47
[35]   Optimization of the novel hydrodynamic cavitation based waste cooking oil biodiesel production process parameters using integrated L9 Taguchi and RSM approach [J].
Halwe, D. Aboli ;
Deshmukh, J. Samir ;
Kanu, Nand Jee ;
Gupta, Eva ;
Tale, B. Rushikesh .
MATERIALS TODAY-PROCEEDINGS, 2021, 47 :5934-5941
[36]   Transesterification of waste frying oil using a zinc aluminate catalyst [J].
Alves, C. T. ;
Oliveira, A. ;
Carneiro, S. A. V. ;
Silva, A. G. ;
Andrade, H. M. C. ;
Vieira de Melo, S. A. B. ;
Torres, E. A. .
FUEL PROCESSING TECHNOLOGY, 2013, 106 :102-107
[37]   Selection of optimal performance parameters of DI diesel engine using Taguchi approach [J].
Venkatanarayana, B. ;
Ratnam, Ch .
BIOFUELS-UK, 2019, 10 (04) :503-510
[38]   Synthesis of fatty acid methyl ester via transesterification of waste frying oil by a zinc-modified pumice catalyst: Taguchi approach to parametric optimization [J].
Yusuff, Adeyinka S. ;
Bello, Kazeem A. .
REACTION KINETICS MECHANISMS AND CATALYSIS, 2019, 128 (02) :739-761
[39]   Synthesis of fatty acid methyl ester via transesterification of waste frying oil by a zinc-modified pumice catalyst: Taguchi approach to parametric optimization [J].
Adeyinka S. Yusuff ;
Kazeem A. Bello .
Reaction Kinetics, Mechanisms and Catalysis, 2019, 128 :739-761
[40]   Optimization of ferrous biooxidation rate in a packed bed bioreactor using Taguchi approach [J].
Mousavi, S. M. ;
Yaghmaei, S. ;
Jafari, A. ;
Vossoughi, M. ;
Ghobadi, Z. .
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION, 2007, 46 (10) :935-940