Constitutive analysis and optimization on hot working parameters of as-cast high Cr ultra-super-critical rotor steel with columnar grains

Isothermal hot compression tests on the as-cast high-Cr ultra-super-critical rotor steel with columnar grains were carried out in the temperature range from 1223 to 1523Kand at strain rates from 0.001 to 1s-1.The compression direction was parallel to the longitudinal direction of columnar grains.The constitutive equation based on Arrhenius model was presented,and the processing maps based on the dynamic material model were developed,correlating with microstructure observation.The main softening mechanism was dynamic recovery at 1223 Kunder strain rates from 0.1to 1s-1,whereas it was dynamic recrystallization under other deformation conditions.The constitutive equation modified by strain compensation reasonably predicted the flow stresses.The processing maps and microstructure evolution mechanism schematic indicated that the optimum hot working parameters lay in the zone defined by the temperature range from 1423 to 1473Kand the strain rate range from 0.001 to 1s-1.