Mechanical Properties of Carbon Epoxy Prepreg Insert Phenolic Resin Injection Moldings

被引：2

作者：

PINPATHOMRAT Badin ^{[1
]}

KEIGO Nishitani ^{[1
]}

THUMSORN Supaphorn ^{[2
]}

Narongchai OCharoen ^{[3
]}

Yuqiu YANG ^{[4
]}

HAMADA Hiroyuki ^{[1
]}

机构：

[1] Department of Advanced Fibro-Science, Kyoto Institute of Technology

[2] Department of Industrial Engineering, Pathumwan Institute of Technology

[3] Department of Materials and Metallurgical Engineering, Rajamangala University of Technology Thanyaburi

[4] Key Laboratory of Textile Science & Technology, Ministry of Education, College of Textiles, Donghua

来源：

纤维复合材料 | 2019年 / 36卷 / 02期

关键词：

insert injection molding; unidirectional prepregs; woven fabric prepreg; thermosetting composite;

D O I：

暂无

中图分类号：

TQ320.662 [];

学科分类号：

摘要：

This study focuses on the insert-injection molding process. The thermoset composite inserts in this study were carbon fiber/epoxy(CF/Epoxy) prepreg sheets. The injected molded part was glass fiber contained phenolic resin(GF/PF). The CF/Epoxy was placed in the mold cavity prior to injecting GF/PF onto the inserted injection molded CF/Epoxy specimens. The role of adhesion between the inserted part and injected resin on the mechanical properties was evaluated by 3 point bending and impact tests. In addition, the effect of prepreg orientation on the mechanical properties of the prepreg inserted-injection molding system was investigated. It was found that the prepreg with unidirectional orientation significantly improved flexural and impact strength of the inserted injection molding composites, providing better support and resistance to bending and impact loading. The main failure modes of the specimens were structural and adhesive failure.

引用

页码：3 / 7

页数：5

共 9 条

[1] Study on Adhesive Property of Insert Injection Molded Glass Fiber Reinforced Polypropylene Composites. B.Pinpathomrat et al. Open Journal of Composite Materials . 2016
[2] Bohse J. Journal of Acoustics . 2004
[3] O’’Higgins R.M,McCarthy M.A,McCarthy C.T. Composites Materials . 2004
[4] Davim J.P,Reis P,Antonio C.C. Composites Science and Technololy . 2004
[5] Mohan N.S,Kulkarni S.M,Ramach A. Composites Science and Technology . 2007
[6] Ryosuke M,Mo toko S,Akira T. Composites Part A Applied Science and Manufacturing . 2008
[7] Process-Induced Shape Distortions in Aerospace Thermoplastic Composites. Fortin,GY. . 2016
[8] Handbook of Semiconductor Manufacturing Technology. Yoshio N,Robert D. . 2000
[9] Improvement on Adhesion Properties of Insert Injection Molding Composites: Effect of Inserted Parts, Adhesive Lengths and Injection Conditions[J] . Badin Pinpathomrat,Hiroyuki Hamada. &nbspOpen Journal of Composite Materials . 2017 (04)

← 1 →