A Generalized Self-Consistent Model for Interfacial Debonding Behavior of Fiber Reinforced Rubber Matrix Sealing Composites

被引：0

作者：

张斌 ^{[1
,2
]}

宇晓明 ^{[1
]}

顾伯勤 ^{[3
]}

机构：

[1] School of Mechanical Engineering, Changshu Institute of Technology

[2] Jiangsu Key Laboratory of Recycling and Reuse Technology for Mechanical and Electronic Products, Changshu Institute of Technology

[3] College of Mechanical and Power Engineering, Nanjing Tech University

来源：

Journal of Shanghai Jiaotong University(Science) | 2017年 / 22卷 / 03期

基金：

中国国家自然科学基金;

关键词：

fiber; rubber; composites; interphase; interfacial debonding;

D O I：

暂无

中图分类号：

TB332 [非金属复合材料];

学科分类号：

0805 ; 080502 ;

摘要：

This paper presents an experimental and numerical study of short-fiber-reinforced rubber matrix sealing composites(SFRC). The transverse tensile stress-strain curves of SFRC are obtained by experiments. Based on the generalized self-consistent method, a representative volume element(RVE) model is established, and the cohesive zone model is employed to investigate the interfacial failure behavior. The effect of interphase properties on the interfacial debonding behavior of SFRC is numerically investigated. The results indicate that an interphase thickness of 0.3 μm and an interphase elastic modulus of about 502 MPa are optimal to restrain the initiation of the interfacial debonding. The interfacial debonding of SFRC mainly occurs between the matrix/interphase interface,which agrees well with results by scanning electron microscope(SEM).

引用

页码：343 / 348

页数：6

共 18 条

[1] 短纤维增强橡胶密封复合材料纵向拉伸模量的预测方法
张斌
顾伯勤
宇晓明
[J]. 上海交通大学学报, 2015, 49 (01) : 96 - 100
[2] 界面反应对SiC纤维增强钛基复合材料界面剪切强度的影响(英文)
原梅妮
杨延清
黄斌
吴耀金
[J]. 稀有金属材料与工程, 2009, 38 (08) : 1321 - 1324
[3] The mechanical and tribological properties of nitric acid‐treated carbon fiber‐reinforced polyoxymethylene composites[J] . Yuanyuan Zhang,Shiwei Zhu,Yuan Liu,Bin Yang,Xinling Wang.J. Appl. Polym. Sci. . 2015 (15)
[4] Effects of short fiber tip geometry and inhomogeneous interphase on the stress distribution of rubber matrix sealing composites
Yu, Xiaoming
Gu, Boqin
Zhang, Bin
[J]. JOURNAL OF APPLIED POLYMER SCIENCE, 2015, 132 (16)
[5] Failure behavior of resorcinol–formaldehyde latex coated aramid short‐fiber‐reinforced rubber sealing under transverse tension[J] . Bin Zhang,Boqin Gu,Xiaoming Yu.J. Appl. Polym. Sci. . 2015 (12)
[6] Intraply fracture of fiber-reinforced composites: Microscopic mechanisms and modeling[J] . Luis Pablo Canal,Carlos González,Javier Segurado,Javier LLorca.Composites Science and Technology . 2012 (11)
[7] Three-dimensional numerical simulations on the hyperelastic behavior of carbon-black particle filled rubbers under moderate finite deformation[J] . Xu Li,Yong Xia,Ziran Li,Yuanming Xia.Computational Materials Science . 2011
[8] Constitutive modeling of fiber composites with a soft hyperelastic matrix[J] . Francisco López Jiménez,Sergio Pellegrino.International Journal of Solids and Structures . 2011 (3)
[9] Micromechanical modelling of the transverse damage behaviour in fibre reinforced composites[J] . T.J. Vaughan,C.T. McCarthy.Composites Science and Technology . 2010 (3)
[10] Finite deformation of incompressible fiber-reinforced elastomers: A computational micromechanics approach[J] . Joaquín Moraleda,Javier Segurado,Javier LLorca.Journal of the Mechanics and Physics of Solids . 2009 (9)

← 1 2 →