Influence Predictions of Contact Effects on Mesh Stiffness of Face Gear Drives with Spur Gear

被引：3

作者：

李政民卿

王晶

朱如鹏

机构：

[1] CollegeofMechanicalandElectricalEngineering,NanjingUniversityofAeronauticsandAstronautics

来源：

Transactions of Nanjing University of Aeronautics and Astronautics | 2015年 / 32卷 / 05期

关键词：

face gear drive; mesh stiffness; contact effect; equivalent tooth; Ishikawa model;

D O I：

10.16356/j.1005-1120.2015.05.566

中图分类号：

TH132.41 [齿轮及齿轮传动];

学科分类号：

080203 ;

摘要：

Mesh stiffness is one of important base parameters of face gear dynamic studies.However,a calculation solution of mesh stiffness of face gear drives is not to be constructed due to complex geometric flakes of face gear teeth.Thus,a calculation solution of mesh stiffness of face gear drives with a spur gear,which is based on the proposed equivalent face gear teeth and Ishikawa model,is constructed,and the influence of contact effects on mesh stiffness of face gear drives is investigated.The results indicate the mesh stiffness of face gear drives is sensitive to contact effects under heavy loaded operating conditions,specially.These contributions will benefit to improve dynamic studies of face gear drives.

引用

页码：566 / 570

页数：5

共 13 条

[1]

Tooth flank and strength of gear drive. Song Lemin. . 1987

[2]

Study of the Dynamic Behavior of Face Gear Transmission System[J] . Tao Huang,Yi Yan Zhang. &nbspApplied Mechanics and Materials . 2013 (268)

[3] 面齿轮传动分扭系统扭转振动的固有频率分析 [J].

张乐 ;

朱如鹏 ;

李政民卿 .

机械制造与自动化, 2012, 41 (05) :21-24

[4] 正交面齿轮传动系统的非线性振动特性 [J].

靳广虎 ;

朱如鹏 ;

鲍和云 .

中南大学学报(自然科学版), 2010, 41 (05) :1807-1813

[5]

Meshing Stiffness Analysis of Gear Using the Ishikawa Method[J] . Li Xiong Gu,Zhi Fang Liu,Zhong Yong Xu. &nbspApplied Mechanics and Materials . 2013 (401)

[6] 非正交面齿轮传动系统的耦合振动分析 [J].

李晓贞 ;

朱如鹏 ;

李政民卿 ;

靳广虎 .

中南大学学报(自然科学版), 2013, 44 (06) :2274-2280

[7] 面齿轮传动系统参数激励振动特性分析 [J].

杨振 ;

王三民 ;

范叶森 ;

刘海霞 .

重庆大学学报, 2011, 34 (01) :26-35

[8] 正交面齿轮传动系统分岔特性 [J].

杨振 ;

王三民 ;

范叶森 ;

刘海霞 .

哈尔滨工业大学学报, 2011, 43 (03) :107-110

[9]

Floating shaft load sharing method for face gear split torque transmission system. Wang R,Zhao N,Tao L,et al. Research Journal of Applied Sciences,Engineering and Technology . 2013

[10]

Influence of Setting Error of Tool on Tooth Profile and Contact Point of Face Gear Drive[J]. 李晓贞,朱如鹏,李政民卿,李发家. Transactions of Nanjing University of Aeronautics and Astronautics. 2014(04)

← 1 2 →