Corrosion Resistance of 316L Stainless Steel in Acetic Acid by EIS and Mott-Schottky

被引:1
|
作者
CHENG Xuequn1
机构
关键词
stainless steel; passivation film; Mott-Schottky; acetic acid;
D O I
暂无
中图分类号
TN301.2 [];
学科分类号
摘要
The properties of the passivation film formed on 316L stainless steel were studied by Electrochemical Impedance Spectroscopy(EIS),Mott-Schottky and Voltammetry measurements in high- temperature acetic acid.The results show that the passivation film formed on 316L stainless steel is stable in 60% acetic acid solution from 25℃to 85℃.As temperature increased,the polarization resistance decreased but the interface capacitance increased.There was hardly any relation between temperature and the intrinsic property semiconductor.The passivation film represents the p-semiconductor property in the potential interval of-0.5-0.1 V;represents the n-semiconductor property in the potential interval of 0.1-0.9 V;and represents the p-semiconductor property in the potential interval of 0.9-1.1 V.The voltammetry measurements show that the structure of the passivation film is stable when the temperature is lower than 55℃ and that its stability decreased when this temperature is exceeded.
引用
收藏
页码:574 / 578
页数:5
相关论文
共 50 条
  • [41] Passivity of 316L stainless steel in borate buffer solution studied by Mott-Schottky analysis, atomic absorption spectrometry and X-ray photoelectron spectroscopy
    Feng, Zhicao
    Cheng, Xuequn
    Dong, Chaofang
    Xu, Lin
    Li, Xiaogang
    CORROSION SCIENCE, 2010, 52 (11) : 3646 - 3653
  • [42] Corrosion resistance of 316L stainless steel cladded on plain carbon steel by powder metallurgy
    Chen, W
    Wu, Y
    Shen, J
    POWDER METALLURGY, 2001, 44 (04) : 309 - 312
  • [43] Corrosion Behavior of 316L Stainless Steel in Oilfield Produced Water in Presence of CO2 and Acetic Acid
    Li, Ping
    Du, Min
    Hou, Jian
    Zhang, Yanli
    Fan, Lin
    Lin, Cunguo
    INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE, 2020, 15 (05): : 4287 - 4307
  • [44] Corrosion resistance of heated 316L stainless steel with CrC coating in PEMFC environment
    Huang, Naibao
    Pei, Lilin
    Liang, Chenghao
    Xu, Lishuang
    Yu, Hong
    Yang, Hui
    2013 INTERNATIONAL CONFERENCE ON MATERIALS FOR RENEWABLE ENERGY AND ENVIRONMENT (ICMREE), VOLS 1-3, 2013, : 419 - 423
  • [45] The effects of electropolishing (EP) process parameters on corrosion resistance of 316L stainless steel
    Lee, SJ
    Lai, HJ
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2003, 140 : 206 - 210
  • [46] Composition and corrosion resistance of palladium film on 316L stainless steel by brush plating
    Tang Jun-lei
    Zuo Yu
    Tang Yu-ming
    Xiong Jin-ping
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2012, 22 (01) : 97 - 103
  • [47] Effect of infiltration on the mechanical properties and corrosion resistance of 316L austenitic stainless steel
    Ivanus, Radu Cristian
    METALURGIA INTERNATIONAL, 2008, 13 (03): : 39 - 45
  • [48] Corrosion resistance and biocompatibility of cold-sprayed titanium on 316L stainless steel
    Wathanyu, Kessaraporn
    Tuchinda, Karuna
    Daopiset, Siriporn
    Sirivisoot, Sirinrath
    SURFACE & COATINGS TECHNOLOGY, 2022, 445
  • [49] Effect of Strain Hardening on Wear and Corrosion Resistance of 316L Austenitic Stainless Steel
    Huang, Jiaqi
    Sun, Guoqing
    Peng, Jian
    Wu, Wangping
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2024, 33 (16) : 8108 - 8121
  • [50] The effect of laser shock processing on corrosion resistance of stainless steel AISI 316L
    Roman, Ionut Bogdan
    Tierean, Mircea Horia
    Baltes, Liana Sanda
    Mirza, Rosca Julia
    ADVANCED MATERIALS AND STRUCTURES V, 2014, 216 : 210 - 215