Thermodynamic and kinetic study on interfacial reaction and diamond graphitization of Cu Fe-based diamond composite

被引：0
|
作者：
李文生 [1 ]
张杰 [1 ]
董洪锋 [1 ]
禇克 [1 ]
王顺才 [2 ]
刘毅 [1 ]
李亚明 [1 ]
机构：
[1] State Key Laboratory of Advanced Non-Ferrous Materials, Lanzhou University of Technology
[2] National Centre for Advanced Tribology, Engineering Sciences, University of Southampton
来源：
Chinese Physics B | 2013年 / 22卷 / 01期
基金：
中国国家自然科学基金;
关键词：
thermodynamics; kinetics; diamond composites; diamond graphitization;
D O I：
暂无
中图分类号：
O613.71 [碳C];
学科分类号：
摘要：
Cu-Fe based diamond composites used for saw-blade segments are directly fabricated by vacuum and pressure- assisted sintering. The carbide forming elements Cr and Ti are added to improve interfacial bonding between diamond and the Cu-Fe matrix. The interfacial reactions between diamond/graphite and Cr or Ti, and diamond graphitization are investigated by thermodynamics/kinetics analyses and experimental methods. The results show that interfacial reactions and graphitization of diamond can automatically proceed thermodynamically. The Cr3C2 , Cr7C3 , Cr23C6 , and TiC are formed at the interfaces of composites by reactions between diamond and Cr or Ti; diamond graphitization does not occur because of the kinetic difficulty at 1093 K under the pressure of 13 MPa.
引用
收藏
页码：524 / 530
页数：7
相关论文
共 50 条
  • [31] Doping Fe-based diamond tool matrix composites with a rare-earth element
    Zou, Q.
    Gong, W.
    Zeng, X.
    Wu, Y.
    Liu, J.
    Zou, Sh.
    JOURNAL OF SUPERHARD MATERIALS, 2009, 31 (06) : 407 - 412
  • [32] Doping Fe-based diamond tool matrix composites with a rare-earth element
    Q. Zou
    W. Gong
    X. Zeng
    Y. Wu
    J. Liu
    Sh. Zou
    Journal of Superhard Materials, 2009, 31 : 407 - 412
  • [33] Fabrication of Fe-Cu matrix diamond composite by microwave hot pressing sintering
    Hou, Ming
    Guo, Shenghui
    Yang, Li
    Gao, Jiyun
    Peng, Jinhui
    Hu, Tu
    Wang, Liang
    Ye, Xiaolei
    POWDER TECHNOLOGY, 2018, 338 : 36 - 43
  • [34] Diamond-Fe-Cu-Ni-Sn composite materials with predictable stable characteristics
    Mechnyk, V. A.
    MATERIALS SCIENCE, 2013, 48 (05) : 591 - 600
  • [35] The effect of Ti/Si ratio for introducing diamond into Cu melts based on Ti-Si-diamond reaction
    Liu, Qing
    Wang, Tonghe
    Wang, Wei
    Liu, Huanyu
    Zhou, Jiyu
    Wang, Huiqiang
    Ding, Haimin
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2022, 105
  • [36] Effect of Si and Ti coating on interface bonding between diamond and Fe-based metal bond
    Lu, Jing
    Wang, Yanhui
    Zang, Jianbing
    Shan, Shuxian
    ADVANCES IN GRINDING AND ABRASIVE TECHNOLOGY XIV, 2008, 359-360 : 15 - 18
  • [37] Effect of matrix composition on the performance of Fe-based diamond bits for reinforced concrete structure drilling
    Hu, Huan-xiao
    Chen, Wei
    Deng, Chao
    Yang, Jun-de
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2021, 95
  • [38] Exploring the Interface Structure on Interfacial Thermal Conductivity by Constructing Sandwich-like Cu/Diamond Slice/Cu Composite
    Zhao, Jiawei
    Song, Manxin
    Peng, Kun
    JOM, 2023, 75 (09) : 3324 - 3331
  • [39] Effects of the additive boron on diamond crystals synthesized in the system of Fe-based alloy and carbon at HPHT
    Zhang, J. Q.
    Ma, H. A.
    Jiang, Y. P.
    Liang, Z. Z.
    Tian, Y.
    Jia, X.
    DIAMOND AND RELATED MATERIALS, 2007, 16 (02) : 283 - 287
  • [40] Effects of rare earth and sintering temperature on the transverse rupture strength of Fe-based diamond composites
    Dai, QL
    Luo, CB
    Xu, XP
    Wang, YC
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2002, 129 (1-3) : 427 - 430
12345