Analysis of factors affecting diagonal tension and compression capacity of corner joints in furniture frames fabricated with dovetail key

被引：0

作者：

Mosayeb Dalvand ^{[1
]}

Ghanbar Ebrahimi ^{[1
]}

Akbar Rostampour Haftkhani ^{[1
]}

Sadegh Maleki ^{[1
]}

机构：

[1] Department of Wood and Paper Science and Technology,Faculty of Natural Resources,University of Tehran,Karaj,Iran.

来源：

Journal of Forestry Research | 2013年 / 24卷 / 01期

关键词：

diagonal tension; diagonal compression; dovetail key; joints; lumber;

D O I：

暂无

中图分类号：

TS664.0 [一般性问题];

学科分类号：

0829 ; 082902 ;

摘要：

This study was conducted to analyze the effect of joint type, and numbers and types of dovetail keys on diagonal tension and compression performance of corner joints in a furniture frame. Joint members were cut from white fir lumber. Butted and mitered joints were constructed with one and two dovetail key(s) with butterfly and H shapes. Joints were glued by polyvinyl acetate (PVAc) and cynoacrylate (CA). Compression capacity of joints was higher than diagonal tension. Mitered joints were stronger than butted ones. Butterfly dovetail keys were superior to H shape keys. Double keys performed better than single key. Experimental joints glued with PVAc were stronger than those glued with CA glue and control specimens. In terms of strength, butterfly dovetailed joints were comparable with doweled joints.

引用

页码：155 / 168

页数：14

共 22 条

[1]

Handbook of joinery. A. Jones,R. Lutes. . 1993

[2]

Bending strength of corner joints constructedwith injection molded splines. Eckelman CA,Lin FC. Forest Products Journal . 1997

[3]

Optimum dowel spacing for corner joints in 32 mm cabinet construction. A.N. Tankut. Forest Products Journal . 2005

[4]

Rational design of multi dowel corner joints in case construction. J.L. Zhang,C.A. Eckelman. Forest Products Journal . 1993

[5]

The bending moment resistance of single-dowel corner joints in case construction. J.L. Zhang,C.A. Eckelman. Forest Products Journal . 1993

[6]

Bending moment capacity of rectangular mortise and tenon furniture joints. Y.Z.Erdil,A.Kasal,C.A.Eckelman. Forest Products Journal . 2005

[7]

The effect of adhesive type and bond line thickness on the strength of mortise and tenon joints. Nurgul Tankut. International Journal of Adhesion & Adhesives . 2007

[8]

Bending strength of screwed corner joints with different materials, G.ü. A. Kasal,S. ?ener,M. Belgin,H. Efe. Journal of Sciences . 2006

[9]

Determination of diagonal compression and tension performances for case furniture corner joints constructed with wood biscuits. M. Atar,A. Ozcifci,M. Altinok,U. Celikel. Materials and Design . 2009

[10]

Investigations the effects of fastener, glue, and composite material types on the strength of corner joints in case-type furniture construction. A.N. Tankut,N. Tankut. Materials and Design . 2009

← 1 2 3 →