Consolidation and properties of ultrafine binderless cemented carbide by spark plasma sintering

被引:0
作者
LIU Xiangqing LIN Tao Shao Huiping GUO Zhimeng LUO Ji HAO Junjie School of Materials Science and EngineeringUniversity of Science and Technology BeijingBeijing China [100083 ]
机构
关键词
cemented carbide; binderless carbide; ultrafine; mechanical properties; spark plasma sintering;
D O I
暂无
中图分类号
TF124.5 [];
学科分类号
080502 ;
摘要
<正>Owing to the absence of metal binder,binderless cemented carbides have higher wear,corrosion,and oxidation resistance.WC-0.3VC- 0.5Cr3C2 powders with an average particle size of 200 nm and a little amount of active element were consolidated by spark plasma sintering. The sintered microstructure revealed that the average WC grain size was 0.24μm,which was almost consistent with the initial fine powder. The results of XRD showed that W2C phase was formed.Nearly complete densification of ultrafme binderless cemented carbide was achieved by sintering at 1400℃for 120 s under 50 MPa.The resulting hardness and the fracture toughness were 28.18 GPa and 6.05 MPa·m1/2,respectively.
引用
收藏
页码:320 / 323
页数:4
相关论文
共 3 条
[1]   Consolidation and properties of binderless sub-micron tungsten carbide by field-activated sintering [J].
Kim, HC ;
Shon, IJ ;
Garay, JE ;
Munir, ZA .
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2004, 22 (06) :257-264
[2]  
Microstructures of binderless tungsten carbides sintered by spark plasma sintering process[J] . Seung I. Cha,Soon H. Hong.Materials Science & Engineering A . 2003 (1)
[3]  
Sintering, consolidation, reaction and crystal growth by the spark plasma system (SPS)[J] . Mamoru Omori.Materials Science & Engineering A . 2000 (2)