Undrained shear strength evaluation for hydrate-bearing sediment overlying strata in the Shenhu area, northern South China Sea

被引:10
作者
Yanlong Li [1 ,2 ,3 ]
Gaowei Hu [1 ,2 ,3 ]
Nengyou Wu [1 ,2 ,3 ]
Changling Liu [1 ,2 ,3 ]
Qiang Chen [1 ,2 ,3 ]
Chenan Li [1 ,3 ,4 ]
机构
[1] Key Laboratory of Gas Hydrate, Ministry of Natural Resources
[2] Laboratory for Marine Mineral Resource, Pilot National Laboratory for Marine Science and Technology (Qingdao)
[3] Qingdao Institute of Marine Geology, China Geological Survey
[4] College of Information and Control Engineering, China University of Petroleum
关键词
piezocone penetration test; hydrate exploitation test; undrained shear strength; calcareous clay; Shenhu area; South China Sea;
D O I
暂无
中图分类号
P736.21 [海洋沉积];
学科分类号
070704 ; 0709 ;
摘要
The undrained shear strength of shallow strata is a critical parameter for safety design in deep-water operations.In situ piezocone penetration tests(CPTU) and laboratory experiments are performed at Site W18-19 in the Shenhu area, northern South China Sea, where China's first marine hydrate exploitation operation is due to be located. The validation of the undrained shear strength prediction model based on CPTU parameters. Different laboratory tests, including pocket penetrometer, torvane, miniature vane and unconsolidated undrained triaxial tests, are employed to solve empirical cone coefficients by statistical and mathematical methods. Finally, an optimized model is proposed to describe the longitudinal distribution of undrained shear strength in calcareous clay strata in the Shenhu area. Research results reveal that average empirical cone coefficients based on total cone resistance, effective resistance, and excess-pore pressure are 13.8, 4.2 and 14.4, respectively. The undrained shear strength prediction model shows a good fit with the laboratory results only within specific intervals based on their compaction degree and gas-bearing conditions. The optimized prediction model in piecewise function format can be used to describe the longitudinal distribution of the undrained shear strength for calcareous clay within all depth intervals from the mud-line to the upper boundary of hydrate-bearing sediments(HBS). The optimized prediction result indicates that the effective cone resistance model is suitable for very soft to firm calcareous clays,the excess-pore pressure model can depict the undrained shear strength for firm to very stiff but gas-free clays,while the total cone resistance model is advantageous for evaluating the undrained shear strength for very stiff and gassy clays. The optimized model in piecewise function format can considerably improve the adaptability of empirical models for calcareous clay in the Shenhu area. These results are significant for safety evaluations of proposed hydrate exploitation projects.
引用
收藏
页码:114 / 123
页数:10
相关论文
共 19 条
[1]   神狐海域W18/19站位天然气水合物上覆层不排水抗剪强度预测 [J].
胡高伟 ;
李彦龙 ;
吴能友 ;
陈强 ;
刘昌岭 ;
刘振纹 .
海洋地质与第四纪地质, 2017, (05) :151-158
[2]  
Geothermal investigation of the thickness of gas hydrate stability zone in the north continental margin of the South China Sea[J]. WANG Yanmin,LIU Shaowen,HAO Feifei,ZHAO Yunlong,HAO Chunyan.Acta Oceanologica Sinica. 2017(04)
[3]   含水合物沉积物损伤统计本构模型及其参数确定方法 [J].
李彦龙 ;
刘昌岭 ;
刘乐乐 .
石油学报, 2016, 37 (10) :1273-1279
[4]   基于CPTU的宁波黏性土不排水抗剪强度确定研究 [J].
李学鹏 ;
杨晓娟 ;
蔡国军 ;
李飚 ;
林军 .
重庆交通大学学报(自然科学版), 2016, 35 (06) :20-23+50
[5]   水合物沉积物三轴试验存在的关键问题分析 [J].
李彦龙 ;
刘昌岭 ;
刘乐乐 ;
黄萌 ;
孙建业 ;
李承峰 .
新能源进展, 2016, 4 (04) :279-285
[6]   基坑中基于CPTU软土不排水强度确定及应用 [J].
杨溢军 ;
童立元 ;
朱宁 ;
刘松玉 .
地下空间与工程学报, 2016, 12 (04) :1095-1101
[7]   海底沉积物工程力学性质原位测量方法 [J].
季福东 ;
贾永刚 ;
刘晓磊 ;
郭磊 ;
张民生 ;
单红仙 .
海洋地质与第四纪地质, 2016, 36 (03) :191-200
[8]   上海地区土体抗剪强度与静力触探比贯入阻力相关关系研究 [J].
马海鹏 ;
陈祖煜 ;
于沭 .
岩土力学, 2014, 35 (02) :536-542
[9]   考虑软黏土结构性损伤的圆柱孔扩张弹塑性分析 [J].
刘维正 ;
石名磊 ;
徐林荣 .
岩土工程学报, 2013, 35 (03) :487-494
[10]   桥梁基础工程中基于CPTu的粘性土不排水抗剪强度确定方法(英文) [J].
童立元 ;
王强 ;
杜广印 ;
刘松玉 ;
蔡国军 .
Journal of Southeast University(English Edition), 2011, 27 (02) :201-205