CONTROL OF TRANSPIRATION COOLING SYSTEM AND ITS CHARACTERISTICS

被引:2
|
作者
徐燕侯
杨学实
机构
[1] P. O. Box 142
[2] 206#
[3] University of Science and Technology of China
[4] Beijing
[5] Department of Modern Mechanics
[6] Hefei
基金
中国国家自然科学基金;
关键词
transpiration cooling; heat transfer; distributed parameters control; variable-domain; nonlinear;
D O I
暂无
中图分类号
学科分类号
摘要
This paper gives the mathematical model of three-dimensional transpiration cooling control system in heat shield.Generally,it.a non-linear control system on variable-domain mixed up with both distributed and concentrated parameters.This paper points out that the thermal and ablative problems of the shield can be solved solely with the coolant flow only under one-dimensional incompressible or steady condition.In regard to the surface ablating problem of the thermal shield,the control schemes of the system,including its simplified condition and the characteristics of one-dimensional point control is suggested here.Solutions of the equilibrium state are given with or without phase change as far as the coolant is concerned.
引用
收藏
页码:1047 / 1056
页数:10
相关论文
共 50 条
  • [41] Numerical study on transient response of transpiration cooling with hydrocarbon fuel as coolant
    Liu, Xue
    Li, Yingge
    Zhou, Weixing
    Jia, Zhenjian
    APPLIED THERMAL ENGINEERING, 2023, 233
  • [42] Numerical investigation on the transpiration cooling of three-dimensional hypersonic inlet
    He, Fei
    Wu, Nan
    Ran, Fangyuan
    Wang, Jianhua
    AEROSPACE SCIENCE AND TECHNOLOGY, 2020, 106
  • [43] Experimental investigation of transpiration cooling for sintered woven wire mesh structures
    Xu, Guoqiang
    Liu, Yangpeng
    Luo, Xiang
    Ma, Jiandong
    Li, Haiwang
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2015, 91 : 898 - 907
  • [44] Effects of Coolants of Double Layer Transpiration Cooling System in the Leading Edge of a Hypersonic Vehicle
    Luo, Shibin
    Miao, Zhichao
    Liu, Jian
    Song, Jiawen
    Xi, Wenxiong
    Liu, Chaoyang
    FRONTIERS IN ENERGY RESEARCH, 2021, 9
  • [45] An experimental investigation on transpiration cooling with phase change under supersonic condition
    Shen, Lin
    Wang, Jianhua
    Dong, Wenjie
    Pu, Jian
    Peng, Jinlong
    Qu, Dejun
    Chen, Lianzhong
    APPLIED THERMAL ENGINEERING, 2016, 105 : 549 - 556
  • [46] Numerical simulation of transpiration cooling experiments in supersonic flow using OpenFOAM
    Prokein, Daniel
    Dittert, Christian
    Boehrk, Hannah
    von Wolfersdorf, Jens
    CEAS SPACE JOURNAL, 2020, 12 (02) : 247 - 265
  • [47] Experimental study on transpiration cooling through additively manufactured porous structures
    Poupinha, Carolina
    Kozlowska, Sylwia
    Lluch, Javier Soriano
    Altimare, Davide
    Kinell, Mats
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2024, 227
  • [48] EFFECT OF PORE BLOCKAGE ON TRANSPIRATION COOLING WITH ADDITIVE MANUFACTURABLE PERFORATE HOLES
    Yang, Li
    Min, Zheng
    Parbat, Sarwesh Narayan
    Chyu, Minking K.
    PROCEEDINGS OF THE ASME TURBO EXPO: TURBOMACHINERY TECHNICAL CONFERENCE AND EXPOSITION, 2018, VOL 2D, 2018,
  • [49] A modified energy equation model for flow boiling in porous media and its application to transpiration cooling at low pressures with transient effect
    Hu, Haowei
    Jiang, Peixue
    Ouyang, Xiaolong
    Zhao, Cheng
    Xu, Ruina
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2020, 158
  • [50] Numerical investigation on directional transpiration cooling performance coupled with regenerative cooling
    Zheng, Jiayue
    Liu, Xue
    Zhou, Weixing
    Bian, Yuyang
    INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2024, 159