Flexural Strength and Behavior of Polypropylene Fiber Reinforced Concrete Beams

被引：1

作者：

姚武

机构：

来源：

Journal of Wuhan University of Technology-Materials Science | 2002年 / 02期

关键词：

polypropylene fiber; mechanical properties; fiber reinforced concrete;

D O I：

暂无

中图分类号：

TU377.9 [其他非金属筋混凝土结构];

学科分类号：

081304 ; 081402 ;

摘要：

The strength and deformation characteristics of polypropylene fiber reinforced concrete ( PFRC) beams were investigated by four-point bending procedures in this paper. Two kinds of polypropylene fibers with different fiber contents (0.2% , 0.5% , 1.0% and 1.5% ) by volume were used in, the beam, which measured 100 × 100 mm with a span of 300 mm. It was found that the strength of the reinforced concrete beams was significantly decreased, whereas the flexural toughness was improved, compared to those unreinforced concrete beams. Geometry properties and volume contents of polypropylene fiber were considered to be important factors for improving the flexural toughness. Moreover, the composite mechanism between polypropylene fiber and concrete was analyzed and discussed.

引用

页码：54 / 57

页数：4

共 5 条

[1]

Fiber Reinforced Cementitious Composites.London: Elsevier Science, 19902 Soroushian P, Khan A and Hsu J W. Mechanical Properties of Concrete Materials Reinforced with Polypropylene or Polyethylene fibers. Bentur A and Mindess S. ACI Mat.J . 1992

[2]

Effect of Polypropylene Fibers on the Physical and Mechanical Properties of Cement Based Composites (II) - Mechanical Properties. Yao W,Ma Y,Tan M and Wu K. J. of Building Materials . 2000

[3]

Durability of Mi-cro-reinforced Mortars. Pigeon M,Azzabi M,Pleau R and Banthia N. Cement and Concrete Res . 1996

[4]

Long Term Durability of PVA Reinforcing Fibers in a Cement Matrix. Akers S A S,Studinka J B and Meier P. International J. of Cement Composites and Lightweight Concrete . 1989

[5]

Marine Curing of Steel Fiber Composites. Banthia N and Foy C. J. of Materials in Civil Engineering . 1989

← 1 →