Experimental determination of mechanical properties and short-time creep of AISI 304 stainless steel at elevated temperatures

被引:0
作者
Josip Brnic [1 ]
Jitai Niu [2 ]
Goran Turkalj [1 ]
Marko Canadija [1 ]
Domagoj Lanc [1 ]
机构
[1] Faculty of Engineering,University of Rijeka
[2] School of Material and Chemical Engineering,Zhongyuan University of Technology
关键词
AISI; 304; mechanical properties; elevated temperature; creep tests; constitutive model;
D O I
暂无
中图分类号
TG142.71 [不锈钢、耐酸钢];
学科分类号
080502 ;
摘要
The high temperature properties of AISI 304 stainless steel were studied.Basic data about the employed experimental equipment,testing procedures,and specimen geometry were given.The experimental setup was used to obtain stress-strain diagrams from tensile tests at room temperature as well as several elevated temperatures.Furthermore,the specimens were subjected to short-time creep tests at various temperatures.Stress levels for creep testing were established as a percentage of yield stress.The results indicate that at lowered temperatures and lower stress levels,AISI 304 stainless steel can be used as a sufficiently creep resistant material.
引用
收藏
页码:39 / 45
页数:7
相关论文
共 3 条
[1]  
Microstructure of AISI 304 stainless steel strips produced by a twin-roll caster[J]. Chenxi Ji1), Jiongming Zhang1), Fuxiang Huang1), Xinhua Wang1), Yuan Fang2), and Yan Yu2) 1) School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083, China 2) Advanced Technology Institute, Technology Center of Baosteel, Shanghai 201900, China.Journal of University of Science and Technology Beijing. 2008(06)
[2]   Experimental and numerical investigation of high strength stainless steel structures [J].
Young, Ben .
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 2008, 64 (11) :1225-1230
[3]  
Creep resistance of similar and dissimilar weld joints of P91 steel[J] . Jandová,Kasl,Kanta.Materials at High Temperatures . 2006 (3-4)