Modeling and Optimization of Catalytic Dehydration of Ethanol to Ethylene Using Central Composite Design

被引：0

作者：

孔海宁 ^{[1
]}

齐二石 ^{[1
]}

李钢 ^{[1
]}

何曙光 ^{[1
]}

张宪 ^{[2
]}

机构：

[1] School of Management,Tianjin University

[2] School of Chemical Engineering and Technology,Tianjin University

来源：

Transactions of Tianjin University | 2009年 / 05期

基金：

中国国家自然科学基金;

关键词：

central composite design; catalytic dehydration of ethanol; ethylene yield; modeling; optimization;

D O I：

暂无

中图分类号：

TQ221.211 [];

学科分类号：

0817 ;

摘要：

The central composite design in the modeling and optimization of catalytic dehydration of ethanol to ethylene was performed to improve the ethylene yield.A total of 20 experiments at random were conducted to investigate the effect of reaction temperature,Si/Al ratios of H-ZSM-5 catalyst and liquid hourly space velocity(LHSV) on the ethylene yield.The results show that the relationship between ethylene yield and the three significant independent variables can be approximated by a nonlinear polynomial model,with R-squared of 99.9%and adjusted R-squared of 99.8%.The maximal response for ethylene yield is 93.4%under the optimal condition of 328 ℃,Si/Al ratio 85,and LHSV 3.8 h-1.

引用

页码：366 / 370

页数：5

共 50 条

[21] Modeling and optimization of low-grade Mn bearing ore leaching using response surface methodology and central composite rotatable design
Azizi, Dariush
Shafaei, Sied Ziaedin
Noaparast, Mohammad
Abdollahi, Hadi
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2012, 22 (09) : 2295 - 2305
[22] Experimental Investigation, Modeling and Optimization of Parameters in Hard Anodizing of 6063 Aluminum Alloy Using Central Composite Design
Pouyafar, Vahid
Meshkabadi, Ramin
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 2024, 49 (08) : 11015 - 11029
[23] Formulation Design and Optimization of Aceclofenac Tablets (100 mg) Using Central Composite Design with Response Surface Methodology
Bushra, Rabia
Shoaib, Muhammad H.
Ali, Huma
Zafar, Farya
Naeem, Muhammad I.
Aslam, Nousheen
Yousuf, Rabia I.
LATIN AMERICAN JOURNAL OF PHARMACY, 2014, 33 (06): : 1009 - 1018
[24] Modeling and Optimization of Mechanical Properties of PA6/NBR/Graphene Nanocomposite Using Central Composite Design
Nakhaei, M. R.
Naderi, G.
INTERNATIONAL JOURNAL OF ENGINEERING, 2020, 33 (09): : 1803 - 1810
[25] Applied of central composite design for the optimization of removal yield of the ketoprofen (KTP) using electrocoagulation process
Madi-Azegagh, Katia
Yahiaoui, Idris
Boudrahem, Farouk
Aissani-Benissad, Farida
Vial, Christophe
Audonnet, Fabrice
Favier, Lidia
SEPARATION SCIENCE AND TECHNOLOGY, 2019, 54 (18) : 3115 - 3127
[26] Natural zeolite for nickel ions removal from aqueous solutions: optimization and modeling using response surface methodology based on central composite design
Hosseini, Seyed Saheb Sadat
Khosravi, Amir
Tavakoli, Hamed
Esmhosseini, Majid
Khezri, Somayeh
DESALINATION AND WATER TREATMENT, 2016, 57 (36) : 16898 - 16906
[27] Design and optimization of itraconazole loaded SLN for intranasal administration using central composite design
Rana S.S.
Bhatt S.
Kumar M.
Malik A.
Sharma J.B.
Arora D.
Saini V.
Nanoscience and Nanotechnology - Asia, 2020, 10 (06) : 884 - 891
[28] Modeling and optimization of bi-directional delignification of rice straw for production of bio-fuel feedstock using central composite design approach
Dutta, Sajal Kanti
Halder, Gopinath
Mandal, Mrinal Kanti
ENERGY, 2014, 71 : 579 - 587
[29] Modeling and optimization of a sono-assisted photocatalytic water treatment process via central composite design methodology
Soleymani, Ali Reza
Saien, Javad
Chin, Sungmin
Le, Hoang Anh
Park, Eunseuk
Jurng, Jon Gsoo
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION, 2015, 94 : 307 - 314
[30] Modeling and optimization of the removal of chlorpyrifos and organics reduction from wastewater by Ag/AgBr/TiO2 using the central composite design (CCD)
Lau, Poh Lin
Affam, Augustine Chioma
DESALINATION AND WATER TREATMENT, 2020, 175 : 90 - 98

← 1 2 3 4 5 →