Effect of Precipitation on the Microhardness Distribution of Diode Laser Epitaxially Deposited IN718 Alloy Coating

被引：0

作者：

Yaocheng Zhang ^{[1
]}

Zhuguo Li ^{[1
]}

Pulin Nie ^{[1
]}

Yixiong Wu ^{[1
,2
]}

机构：

[1] Shanghai Key Laboratory of Materials Laser Processing and Modification,School of Materials Science and Engineering,Shanghai Jiao Tong University

[2] State Key Laboratory of Metal Matrix Composites,School of Materials Science and Engineering,Shanghai Jiao Tong University

来源：

Journal of Materials Science & Technology | 2013年 / 29卷 / 04期

基金：

中国国家自然科学基金;

关键词：

IN718; alloy; Laser epitaxial deposition; Microhardness distribution; Precipitation;

D O I：

暂无

中图分类号：

TG174.44 [金属复层保护];

学科分类号：

080503 ;

摘要：

The microhardness distribution of the diode laser epitaxially deposited IN718 alloy coating was investigated.The Laves concentration in different regions of the coating was measured by binarization processing.The strengthening phase of the coating was characterized by transmission electron microscopy(TEM).The results showed that the microhardness increased along the depth of the coating.Part of Laves dissolved into austenitic matrix during the successive laser deposition.A little amount of strengthening phase was precipitated in the bottom region of the coating.It was attributed to the heat effect from the thermal cycle of successive deposition on the microstructure in the bottom region of the epitaxially deposited coating.

引用

页码：349 / 352

页数：4

共 50 条

[41] Effect of the Solution Temperature on the Precipitates and Grain Evolution of IN718 Fabricated by Laser Additive Manufacturing
Cao, Yu
Bai, Pucun
Liu, Fei
Hou, Xiaohu
Guo, Yuhao
MATERIALS, 2020, 13 (02)
[42] Distribution of typical elements in turbine ring thickness section and in δ phase of CSD-formed IN718 alloy
Chen Shengguang
Peng Zhifang
Chen Fangyu
Ren Yaoyao
RARE METAL MATERIALS AND ENGINEERING, 2006, 35 (11) : 1765 - 1769
[43] Investigation on the influence of electrospark deposited 718 alloy coating on the penetration performance of 93 W rod
Zhou, Feng
Xing, Bingnan
Guo, Cean
Du, Chengxin
Xu, Lizhi
Du, Zhonghua
Gao, Guangfa
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2024, 125
[44] Influence of Thermogenetic Effect on Machinability of IN718 Alloy Made by Additive-Subtractive Integrated Manufacturing
Zhao, Yanhua
Han, Xiuping
Xu, Zhixu
Sun, Yujing
Meng, Wei
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2024, 33 (22) : 12227 - 12245
[45] Effect of trace phosphorus and boron on the stress rupture and creep properties of direct aging IN718 alloy
Li, N
Guo, SR
Lu, DZ
Sun, WR
Meng, XN
Hu, ZQ
ACTA METALLURGICA SINICA, 2003, 39 (12) : 1255 - 1258
[46] Microstructure and Wear Properties of IN718/WC Composite Coating Fabricated by Ultrasonic Vibration-Assisted Laser Cladding
Lv, Jie
Zhou, Jianzhong
Zhang, Teng
Meng, Xiankai
Li, Pengfei
Huang, Shu
COATINGS, 2022, 12 (03)
[47] Effect of solution treatment on microstructure and stress rupture properties of precipitation hardened IN718 superalloy fabricated by laser powder-bed fusion process
Chizari, A. M.
Kermanpur, A.
Foroozmehr, E.
Rezaeian, A.
Sadeghi, F.
Rezaei, Ali
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2022, 21 : 2296 - 2308
[48] Precipitation Behavior of IN718 After Surface Mechanical Attrition Treatment (SMAT) and Its Effect on Wear Properties
Bisht, Anuj
Gaddam, Supreeth
Kumar, Lailesh
Dileep, B. P.
Suwas, Satyam
JOM, 2018, 70 (11) : 2667 - 2676
[49] Pulsed laser cladding on IN718 alloy using pre-coated CrCoNi-TiC/SiC powders for enhancing wear resistance
Liu, Yuanzhuo
Chai, Linjiang
Yang, Tao
Hu, Chaodan
Wang, Chuanmei
Xi, Guoqiang
SURFACE & COATINGS TECHNOLOGY, 2024, 476
[50] Finite element and experimental analysis of elevated-temperature fatigue behavior of IN718 alloy subjected to laser peening
Huang, Shu
Sheng, Jie
Wang, Zuowei
Meng, Xiankai
Lu, Jinzhong
Hu, Xiaoqi
Zhou, Jianzhong
INTERNATIONAL JOURNAL OF FATIGUE, 2020, 131 (131)

← 1 2 3 4 5 →