Repetitious-Hot-Pressing Technique in Hot-Pressing Process

被引：0
|
作者：
Shixue SONG
机构：
来源：
JournalofMaterialsScience&Technology | 2003年 / 05期
关键词：
Hot-pressing sintering; Repetitious-hot-pressing sintering; Composite;
D O I：
暂无
中图分类号：
TG306 [压力加工工艺];
学科分类号：
摘要：
A new pressing method was proposed for hot-pressing process.Experimental results indicated that the porosity in Al;O;/TiC/Ni/Mo （hereafter called Al;O;/TiC composite）composite compacts decreases by 6% after adopting this new technique.compared to traditional hot-pressing technique under the same sintering temperature. The flexural strength and Vickerhardness increase from 883 MPa to 980 MPa and from 16 GPa to 21.1 GPa, respectively.A theoretical model was given toanalyze the densification mechanism of the composite in the process of repetitious-hot-pressing.
引用
收藏
页码：486 / 488
页数：3
相关论文
共 50 条
  • [31] HOT-PRESSING OF IRON POWDERS
    HENRY, OH
    CORDIANO, JJ
    TRANSACTIONS OF THE AMERICAN INSTITUTE OF MINING AND METALLURGICAL ENGINEERS, 1946, 166 : 520 - 532
  • [32] HOT-PRESSING OF MGO WITH NAF
    RICE, RW
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1971, 54 (04) : 205 - &
  • [33] HOT-PRESSING OF ZNS AND CDTE
    CARNALL, E
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1972, 55 (11) : 582 - &
  • [34] SYNTHESIS VIA HOT-PRESSING
    CLASS, WH
    BINDER, I
    AMERICAN CERAMIC SOCIETY BULLETIN, 1970, 49 (04): : 382 - &
  • [35] DENSIFICATION BY POWDER-VEHICLE, HOT-PRESSING TECHNIQUE
    LANGE, FF
    TERWILLI.GR
    AMERICAN CERAMIC SOCIETY BULLETIN, 1971, 50 (09): : 787 - &
  • [36] Preparation of hydroxyapatite ceramics by hydrothermal hot-pressing technique
    Yanagisawa, K
    Zhu, K
    Fujino, T
    Onda, A
    Kajiyoshi, K
    Ioku, K
    BIOCERAMICS 18, PTS 1 AND 2, 2006, 309-311 : 57 - 60
  • [37] Densification process of sepiolite under hydrothermal hot-pressing
    Fukushima, Yoshiaki
    Meng, Xianping
    Yanagisawa, Kazumichi
    Yamasaki, Nakamichi
    Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy, 1993, 40 (03): : 355 - 358
  • [38] Investigation of hot-pressing process for manufacturing of hardwood particleboard
    Pannipitiya, D.
    Setunge, S.
    Gamage, N.
    Jollands, M.
    INNOVATIONS IN STRUCTURAL ENGINEERING AND CONSTRUCTION, VOLS 1 AND 2, 2008, : 589 - 593
  • [39] Hot-pressing process optimization by response surface methodology
    Park, BD
    Riedl, B
    Hsu, EW
    Shields, J
    FOREST PRODUCTS JOURNAL, 1999, 49 (05) : 62 - 68
  • [40] Simulation of the internal conditions during the hot-pressing process
    Zombori, BG
    Kamke, FA
    Watson, LT
    WOOD AND FIBER SCIENCE, 2003, 35 (01): : 2 - 23
12345