Effect of Squeeze Cast Process Parameters on Fluidity of Hypereutectic Al-Si Alloy

被引：0
|
作者：
Jong-Kyu Baek
Hae-Wook Kwon
机构：
[1] Korea
[2] School of-Materials Science and Engineering Yeungnam University Gyeongsan 712-749
来源：
JournalofMaterialsScience&Technology | 2008年 / 01期
关键词：
Squeeze casting; Al-alloy; Fluidity; Melt treatment;
D O I：
暂无
中图分类号：
TG249.2 [压力铸造];
学科分类号：
080201 ; 080503 ;
摘要：
The effects of processing variables on the fluidity of hypereutectic Al-Si alloy melt during squeeze casting were investigated.The maximum fluidity of Al-16.0%Si alloy during squeeze casting was obtained under the applied pressure of 30 MPa.The fluidity increased with superheat.The fluidity increased with silicon content in the range from 12.0% to 20.0%.That was decreased respectively by eutectic modification and primary silicon refinement.
引用
收藏
页码：7 / 11
页数：5
相关论文
共 50 条
  • [41] Effect of cooling rate on microstructure and mechanical properties of squeeze cast Al-Cu-Mg alloy
    Gan, Y.
    Zhang, D.
    Zhang, W.
    Li, Y.
    INTERNATIONAL JOURNAL OF CAST METALS RESEARCH, 2015, 28 (01) : 50 - 58
  • [42] Effect of electron-plasma alloying on structure and mechanical properties of Al-Si alloy
    Zaguliaev, Dmitrii
    Konovalov, Sergey
    Ivanov, Yurii
    Gromov, Viktor
    APPLIED SURFACE SCIENCE, 2019, 498
  • [43] Viscosity variation of hypereutectic Al-Si alloys with high iron contents around liquidus temperature
    Lin, Chong
    Wu, Shusen
    Lu, Shulin
    Zeng, Jinbiao
    An, Ping
    INTERNATIONAL JOURNAL OF CAST METALS RESEARCH, 2019, 32 (03) : 154 - 163
  • [44] Effect of Squeeze Casting on Microstructure and Mechanical Properties of Hypereutectic Al-xSi Alloys
    Li, Runxia
    Liu, Lanji
    Zhang, Lijun
    Sun, Jihong
    Shi, Yuanji
    Yu, Baoyi
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2017, 33 (04) : 404 - 410
  • [45] Control of segregation in squeeze cast Al-4.5Cu binary alloy
    Durrant, G
    Gallerneault, M
    Cantor, B
    ALUMINIUM ALLOYS: THEIR PHYSICAL AND MECHANICAL PROPERTIES, PART 4/SUPPLEMENT, 1997, 242 : 77 - 82
  • [46] Effect of iron and combined iron and beryllium additions on the fracture toughness and microstructures of squeeze-cast Al-7Si-0.3Mg alloy
    Murali, S
    Trivedi, A
    Shamanna, KS
    Murthy, KSS
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 1996, 5 (04) : 462 - 468
  • [47] The microstructure of direct squeeze cast and gravity die cast 7050 (Al-6.2Zn-2.3Cu-2.3Mg) wrought Al alloy
    Kim, SW
    Durrant, G
    Lee, JH
    Cantor, B
    JOURNAL OF MATERIALS SYNTHESIS AND PROCESSING, 1998, 6 (02) : 75 - 87
  • [48] Effect of Squeeze Casting on Microstructure and Mechanical Properties of Hypereutectic Al-xSi Alloys
    Runxia Li
    Lanji Liu
    Lijun Zhang
    Jihong Sun
    Yuanji Shi
    Baoyi Yu
    Journal of Materials Science & Technology, 2017, 33 (04) : 404 - 410
  • [49] Effect of external ultrasonic treatment on hypereutectic cast aluminium-silicon alloy
    Unal, N.
    Camurlu, H. E.
    Kocak, S.
    Duztepe, G.
    INTERNATIONAL JOURNAL OF CAST METALS RESEARCH, 2012, 25 (04) : 246 - 250
  • [50] THE MICROSTRUCTURES OF LOCALLY REINFORCED SQUEEZE-CAST AL-ALLOY METAL-MATRIX COMPOSITES
    KANG, HG
    ZHANG, DL
    CANTOR, B
    JOURNAL OF MICROSCOPY-OXFORD, 1993, 169 : 239 - 245
12345