Enhanced mechanical properties in Al/diamond composites by Si addition

被引：0

作者：

Jian-Hua Wu ^{[1
]}

Hai-Long Zhang ^{[2
]}

Yang Zhang ^{[2
]}

Jian-Wei Li ^{[2
]}

Xi-Tao Wang ^{[2
]}

机构：

[1] Shandong Engineering Research Center for Lightweight Automobiles Magnesium Alloy,New Materials,Shandong Academy of Sciences

[2] State Key Laboratory for Advanced Metals and Materials,University of Science and Technology Beijing

来源：

RareMetals | 2016年 / 35卷 / 09期

基金：

中国国家自然科学基金; 中央高校基本科研业务费专项资金资助;

关键词：

Composite materials; Diamond particles; Mechanical properties; Interfaces;

D O I：

暂无

中图分类号：

TB33 [复合材料];

学科分类号：

0805 ; 080502 ;

摘要：

Diamond particles reinforced aluminum–silicon matrix composites,abbreviated as Al(Si)/diamond composites,were fabricated by squeeze casting.The effect of Si content on the microstructure and mechanical properties of the composites were investigated.The mechanical properties are found to increase monotonically with Si content increasing up to 7.0 wt%.The Al-7.0 wt% Si/diamond composite exhibits tensile strength of 78 MPa,bending strength of 230 MPa,and compressive strength of426 MPa.Al–Si eutectic phases are shown to connect with Al matrix and diamond particles tightly,which is responsible for the enhancement of mechanical properties in the Al(Si)/diamond composites.

引用

页码：701 / 704

页数：4

共 15 条

[1] Evolution of thermo-physical properties of diamond/Cu composite materials under thermal shock load[J]. Hong Guo,Zhi-Hui Bai,Xi-Min Zhang,Fa-Zhang Yin,Cheng-Chang Jia,Yuan-Yuan Han.Rare Metals. 2014(02)
[2] A predictive model for interfacial thermal conductance in surface metallized diamond aluminum matrix composites[J] . Zhanqiu Tan,Zhiqiang Li,Ding-Bang Xiong,Genlian Fan,Gang Ji,Di Zhang.Materials and Design . 2014
[3] Improved interfacial adhesion between diamond film and copper substrate using a Cu（Cr）–diamond composite interlayer[J] . W.Q. Qiu,Z.W. Liu,L.X. He,D.C. Zeng,Y.-W. Mai.Materials Letters . 2012
[4] Processing of diamond particle dispersed aluminum matrix composites in continuous solid–liquid co-existent state by SPS and their thermal properties[J] . Kiyoshi Mizuuchi,Kanryu Inoue,Yasuyuki Agari,Yoshiaki Morisada,Masami Sugioka,Motohiro Tanaka,Takashi Takeuchi,Jun-ichi Tani,Masakazu Kawahara,Yukio Makino.Composites Part B . 2011 (4)
[5] Influence of the elastic properties of the phases on the coefficient of thermal expansion of a metal matrix composite[J] . M. Vetterli,R. Tavangar,L. Weber,A. Kelly.Scripta Materialia . 2010
[6] Reinforcement architectures and thermal fatigue in diamond particle-reinforced aluminum
Schoebel, M.
Degischer, H. P.
Vaucher, S.
Hofmann, M.
Cloetens, P.
[J]. ACTA MATERIALIA, 2010, 58 (19) : 6421 - 6430
[7] Microstructure and thermal properties of diamond/aluminum composites with TiC coating on diamond particles
Feng, H.
Yu, J. K.
Tan, W.
[J]. MATERIALS CHEMISTRY AND PHYSICS, 2010, 124 (01) : 851 - 855
[8] Mechanical behaviour of diamond reinforced metals[J] . K.A. Weidenmann,R. Tavangar,L. Weber.Materials Science ＆ Engineering A . 2009 (1)
[9] Rigidity of diamond reinforced metals featuring high particle contents
Weidenmann, K. A.
Tavangar, R.
Weber, L.
[J]. COMPOSITES SCIENCE AND TECHNOLOGY, 2009, 69 (10) : 1660 - 1666
[10] Thermal conductivity of aluminum matrix composites reinforced with mixtures of diamond and SiC particles[J] . J.-M. Molina,M. Rhême,J. Carron,L. Weber.Scripta Materialia . 2007 (5)

← 1 2 →