Mechanical properties and corrosion resistance of low rigidity quaternary titanium alloy for biomedical applications

被引:0
作者
Han-Cheol CHOE
Viswanat han S.SAJI
Yeong-Mu KO
机构
[1] DepartmentofDentalMaterials,CollegeofDentistry,ChosunUniversity
关键词
Ti-35Nb-5Ta-7Zr; biomaterial; mechanical properties; corrosion;
D O I
暂无
中图分类号
TG174.4 [金属表面防护技术];
学科分类号
080503 ;
摘要
Electrochemical corrosion of Ti-35Nb-5Ta-7Zr alloy fabricated by arc melting and heat treatment process was studied in 0.9% NaCl at(37±1) ℃.Phase and microstructure of the fabricated alloy were investigated using X-ray diffractometer and scanning electron microscope.Mechanical properties such as yield strength and elastic modulus of the alloy were determined by tensile test.Potentiodynamic polarization technique and impedance spectroscopy were employed to study the corrosion behavior.The results of the study were compared with those obtained for Ti-6Al-4V commercial alloy.The result of the study supports feasibility of Ti-35Nb-5Ta-7Zr alloy for implant applications.
引用
收藏
页码:862 / 865
页数:4
相关论文
共 6 条
[1]   Influence of potential on the electrochemical behaviour of β titanium alloys in Hank's solution [J].
Karthega, M. ;
Raman, V. ;
Rajendran, N. .
ACTA BIOMATERIALIA, 2007, 3 (06) :1019-1023
[2]  
Electrochemical impedance spectroscopic characterisation of passive film formed over β Ti–29Nb–13Ta–4.6Zr alloy[J] . V. Raman,S. Nagarajan,N. Rajendran.Electrochemistry Communications . 2006 (8)
[3]  
Microstructural and mechanical characterization of biomedical Ti–Nb–Zr(–Ta) alloys[J] . L.M. Elias,S.G. Schneider,S. Schneider,H.M. Silva,F. Malvisi.Materials Science & Engineering A . 2006 (1)
[4]  
Effect of Ta content on mechanical properties of Ti–30Nb– X Ta–5Zr[J] . Nobuhito Sakaguchi,Mitsuo Niinomi,Toshikazu Akahori,Junji Takeda,Hiroyuki Toda.Materials Science & Engineering C . 2005 (3)
[5]   High-strength metastable beta-titanium alloys for biomedical applications [J].
Qazi, JI ;
Marquardt, B ;
Rack, HJ .
JOM, 2004, 56 (11) :49-51
[6]   Phase transformations in Ti-Nb-Ta and Ti-Nb-Ta-Zr alloys [J].
Tang, X ;
Ahmed, T ;
Rack, HJ .
JOURNAL OF MATERIALS SCIENCE, 2000, 35 (07) :1805-1811