Integrated Control Strategy for CVT Powertrains with Consideration of Vehicle Drivability

被引:0
作者
SUN Dongye
机构
关键词
vehicles; continuously variable transmission; control strategy; drivability;
D O I
暂无
中图分类号
U464 [汽车发动机];
学科分类号
080703 ;
摘要
During shift,power flow is not interrupted in powertrains equipped with continuously variable transmission(CVT).When hard acceleration is commanded,engine speed will flare and corresponding torque will be consumed,which leads to a drop in vehicle drive torque and also the vehicle acceleration.This is the reason why CVT vehicles have poor drivability during hard acceleration maneuver.Conventional method such as torque compensation doesn’t always work due to the limited backup torque of engine.According to this,means to evaluate the drivability of CVT vehicles are studied,affect factors of drivability are analyzed in detail.Hard acceleration process of CVT vehicle is studied by theoretical analysis,based on which engine torque and ratio change rate of CVT are identified as two key control parameters that decide the drivability of CVT vehicles during hard acceleration maneuver.Therefore,a control strategy based on restricting the change rate of CVT ratio together with torque compensation is proposed,and two different algorithms to establish the limitation of ratio change rate are proposed.These two algorithms are simulated and compared with each other,results indicate that drop of vehicle acceleration is eliminated evidently by limit the change rate of CVT ratio,but small ratio change rate also results in a longer time to finish the accelerate process,an algorithm to decide a proper ratio change rate is needed in order to tune these different characteristics.In order to get better control effects,a new fuzzy logic based algorithm is proposed to decide a proper ratio change rate during kick down conditions,simulation and experiment results indicate that,the amount of vehicle acceleration decrease is reduced from about 1 m/s2 to almost 0,in the mean time the accelerate process only delayed for about 0.3 s.The proposed control strategy and algorithm can effectively tune the characteristics of CVT equipped vehicle during kick down conditions.
引用
收藏
页码:515 / 523
页数:9
相关论文
共 5 条
[1]   考虑CVT效率的无级变速车辆最佳经济性控制 [J].
罗勇 ;
孙冬野 ;
秦大同 ;
陈然 ;
胡丰宾 .
机械工程学报, 2010, 46 (04) :80-86
[2]   无级变速传动系统速比变化率的设计方法 [J].
孙冬野 ;
秦大同 ;
汪新国 .
汽车工程, 2006, (10) :910-913
[3]   驾驶员意图与行驶环境的统一识别及实时算法 [J].
王玉海 ;
宋健 ;
李兴坤 .
机械工程学报, 2006, (04) :206-212
[4]   基于人-车-路环境下汽车无级自动变速传动的智能控制 [J].
孙冬野 ;
秦大同 .
中国机械工程, 2005, (04) :77-80
[5]   基于行驶环境识别的汽车自动换挡系统研究 [J].
金辉 ;
葛安林 ;
雷雨龙 ;
宗昌富 .
机械工程学报, 2002, (05) :56-60